Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
ULS Ultrasonic Level Sensor || ATEK
Ultrasonic working principle
0.5 – 9 meters measuring distance
4-20mA, 0-10V, 0-20 mA analog output options available
CANopen, RS485, RS232 serial communication options
IP67 protection class
Robust housing
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks, measuring range can be calibrated from the menu
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 0.5 – 9 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 30° | %0,2 FS | IP67 |  |
- Ultrasonic working principle
- 0.5 – 9 meters measuring range
- Non-contact and high precision measurement
- ±%0.2 FS accuracy
- Single line 5 digit display and 4 sealed keypads for configuration
- Display of measured value in level, distance (cm, m, inch or feet) or volume (liters, m3, imp, gallons)
- RS-232, RS-485 and CANopen serial connection options
- 4-20 mA, 0-20 mA or 0-10V analog output options
- 2 x PNP Open Collector
- IP67 protection class
- Economical and maintenance-free design
- Easy installation
| Brand |
Atek |
|---|---|
| Measuring Principle |
Non-contact with ultrasonic principle |
| Operating range |
0.5 – 9 meters |
| Blind area |
50 cm max. |
| Measurement Frequency |
40 kHz |
| Accuracy |
± % 0,2 FS |
| Supply Voltage |
16…30 VDC |
| Power consumption |
2,4 Watt max. |
| Current consumption |
100 mA max. @24 VDC / 150 mA max. @16 VDC |
| Sampling rate |
4 Hz |
| Ultrasonic taper angle |
35° |
| Minimum resolution |
1 mm |
| Relay outputs (Optional) |
2 x PNP Open Collector |
| Serial connection (Optional) |
RS-232, RS-485, CANopen |
| Analog outputs (Optional) |
0-10 V, 4-20 mA, 0-20 mA |
| Analog output load |
500 Ω |
| Analog output resolution |
16 Bit |
| Tare input (Optional) |
+Vcc (16…30 VDC) |
| Reverse connection protection |
Yes |
| Overload protection |
Yes (600 mA) |
| Temperature compensation |
Yes |
| Watchdog |
Yes |
| Electrical connection |
M12 / 8 pin male and M12 / 5 pin female sockets (standard) |
| Cable length |
Optional |
| Operating temperature |
-40 °C … 75 °C |
| Storage temperature |
-40 °C … 85 °C |
| Protection class |
With transparent cover: IP65 |
| Housing material |
Delrin® POM-C EN 10204 |
Benzer Ürünler
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Water and Water based liquids | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
Maximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 | |
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 | |
Non-contact liquid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid) Measuring range up to 30m Easy Setup via Bluetooth Small emitting angle ±3.5° 4-20mA + RS485 output G1,5 connection IP67 protection
Ideal for non-contact liquid level measurement in simple applications. It is especially suitable for open channel applications. It can also be used in some liquid tanks and containers.With Bluetooth feature, it allows level reading and adjustment without approaching the tank or hazardous area.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid) | 4-20 mA + RS485 | IP67 | ±2 mm | |
Min. material density sensed; 0.04g/cm³ 2xSPDT relay output SUS304/SUS316/SUS316L rod from 160mm to 6000mm Aluminum housing material LED status indicator IP65 protection class
| Min. material density sensed | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| ≥0.04 g/cm³ | 2 x SPDT Relay | 1"PT | IP65 | -40...+150°C | |
12-30VDC supply voltage NPN or PNP output Suitable for Liquid, viscous medium, powder, granular medium Probe material PEEK surface roughness Ra <0.8 is with good wear resistance LED status indicator Compact and durable structure NEPSI ex-proof certificate IP67 protection
The sensor uses a frequency sweep method which emits an electrical signal at the sensing terminal to detect materials. Different mediums with different characteristics will generate different resonances, which will determine whether the sensor is covered by any materials, causing the switch output signal to light up. Suitable for single-point detection and protection of liquids, viscous mediums, powders, and granular mediums in tanks or pipelines.| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 12~30 Vdc | NPN or PNP | Standard type: 1/2”G Rear mounting type: 3/4”G | IP67 | Normal: -40...+80°C Ex-proof: -10...+70°C | |