Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
ULT30 Ultrasonic Level Sensor || ATEK || Made in Türkiye
Non-contact measurement with ultrasonic principle
Different measuring options up to 6 meters
Acid-proof option
4-20mA, 0-10V, 0-20 mA analog output options
CANopen, RS485, RS232 serial communication options
2 x PNP open collector outputs
IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 |  |
- Ultrasonic working principle
- Different measuring options up to 6 meters
- Acid-proof option
- Non-contact and high precision measurement
- Measurement independent of the targets material, surface or color
- ±%0.2 FS accuracy
- RS-232, RS-485, CANopen serial connection options
- 4-20 mA, 0-20 mA, 0-10V analog output options
- 2 x PNP Open Collector outputs
- IP67 high protection class suitable for harsh environment conditions
- Small, economical and maintenance-free design
- Easy installation
| Brand |
Atek |
|---|---|
| Measuring Principle |
Non-contact with ultrasonic principle |
| Measuring Range |
ULT30-40 : 6000 mm |
| Blind Area |
ULT30-40 : 400 mm |
| Measurement Frequency |
ULT30-40 : 40 kHz |
| Ultrasonic Taper Angle |
ULT30-40 : 30° |
| Acid-Proof |
ULT30-40 : No |
| Accuracy |
± % 0,2 FS |
| Supply Voltage |
16…30 VDC |
| Power Consumption |
2,4 Watt max. |
| Current Consumption |
100 mA max. @24 VDC |
| Sampling Rate |
4 Hz |
| Minimum Resolution |
1 mm |
| Relay Outputs (optional) |
2 x PNP Open Collector |
| Serial connection (optional) |
RS-232, RS-485, CANopen |
| Analog outputs (optional) |
0-10 V, 4-20 mA, 0-20 mA |
| Analog output load |
500 Ω |
| Analog output resolution |
16 Bit |
| Reverse connection protection |
Yes |
| Temperature compensation |
Yes |
| Watchdog |
Yes |
| Electrical connection |
M12 / 8 pin male or M12 / 5 pin female sockets (standard) |
| Cable length |
standard 1m, optional other lengths |
| Operating temperature |
-40 °C … 75 °C |
| Storage temperature |
-40 °C … 85 °C |
| Protection class |
IP67 |
Benzer Ürünler
Suitable for temperatures up to +200ºC 1 RPM rotation speed Material density of 0.3 g/cm3 Switch output 24VDC supply IP65 protection class
Economic solution; gasket design prevents dust accumulation; also suitable for high temperature applications| Operating Temperature | Output | Protection | Datasheet |
|---|---|---|---|
| -40ºC ... +200ºC | Switch | IP65 | |
Shaft with length of 15, 30, 50 cm Aluminium housing Switch output 220VAC or 24VDC supply IP65 protection class Exproof, Atex marking
Atex certified, suitable for use in explosive environments, ex-proof propeller level control sensor for powder or granules| Operating Temperature | Body | Output | Protection | Datasheet |
|---|---|---|---|---|
| -10ºC ... +60ºC | Aluminium | Switch | IP65 | |
Min. material density sensed; 0.04g/cm³ 2xSPDT relay output SUS304/SUS316/SUS316L rod from 160mm to 6000mm Aluminum housing material LED status indicator IP65 protection class
| Min. material density sensed | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| ≥0.04 g/cm³ | 2 x SPDT Relay | 1"PT | IP65 | -40...+150°C | |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit output| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C | |
12-30VDC supply voltage NPN or PNP output Suitable for Liquid, viscous medium, powder, granular medium Probe material PEEK surface roughness Ra <0.8 is with good wear resistance LED status indicator Compact and durable structure NEPSI ex-proof certificate IP67 protection
The sensor uses a frequency sweep method which emits an electrical signal at the sensing terminal to detect materials. Different mediums with different characteristics will generate different resonances, which will determine whether the sensor is covered by any materials, causing the switch output signal to light up. Suitable for single-point detection and protection of liquids, viscous mediums, powders, and granular mediums in tanks or pipelines.| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 12~30 Vdc | NPN or PNP | Standard type: 1/2”G Rear mounting type: 3/4”G | IP67 | Normal: -40...+80°C Ex-proof: -10...+70°C | |