SEP 160 Level Switch with Propeller || Fiama ||
- Plastic body
- Waterproof construction for outdoor work
- Inox steel shaft is mounted on air-tight ball bearings.
- Technopolymer impeller
- 2” 1/2 inch threaded head or 6-hole plate for mounting available on request.
- 16, 30, 50, 70, 100 cm long propeller holder shaft; It is the working part inside the tank.
| Brand |
Fiama |
|---|---|
| Case |
Plastic |
| Protection Class |
P65 |
| Electrical Contacts |
6A 250Vac, 3A 250Vdc |
| Operating Temperature |
-10°…+60° C |
| Absorbtion |
3 VA |
| Power Consumption |
Maks. 4W |
| Shaft Length |
15, 30, 50, 70, 100 cm |
| Electromagnetic Compatibility |
2014/30/UE |
The level controls with propeller SEP are used for the control of level in tanks that contain powders or granular material
|
DATASHEET
|
|
|---|---|
Benzer Ürünler
AISI 316L stainless steel body Different level measurements from 1 meter to 100 meters 4-20mA or 0-10 VDC analog output options RS-485 Modbus output option ±0.2% accuracy Oil- and fuel-resistant model option IP68 protection class Compact structure
Standard diaphragm; submersible level transmitters; durable for harsh conditions; stainless steel body; high precision; EMC and reverse polarity protection; Suitable for use with oils and fuels, wells, water tanks, lake or river level monitoring, reservoirs, wastewater, and greywater.Various immersion length options from 75 mm to 1500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) Various analog output options Maximum reliability thanks to high-quality reed contacts Fast and easy installation
| Immersion Length | Output Signal | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1500mm | 4...20mA (2 wire), 0...10VDC, 0...5VDC, Ratiometrik | G1/2’’, G1”, G1-1/2’’, G2, M20x1,5 | IP65 |
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 secondsMaximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 |
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 |
Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors



