SC 28000 Çatal Tip Titreşimli Seviye Kontrol Sensörü || FineTek
Algılanan minimum malzeme yoğunluğu: ≥0.07g/cm³
Temassız elektronik switch veya NPN/PNP çıkış
1″ veya 3/4″ PF bağlantı
40 mm çatal uzunluğu
SUS 304 gövde malzemesi
LED durum göstergeleri
IP65 (DIN43650 soketli) veya IP67(M12 soketli) koruma sınıf
Dayanıklı gövde; toz birikmelerini önleyen conta tasarımı
| Algılanan minimum Malzeme Yoğunluğu | Çıkış | Bağlantı | Koruma | Çalışma Sıcaklığı | Datasheet |
|---|---|---|---|---|---|
| ≥0.07g/cm³ | Temassız Elektronik Switch veya PNP / NPN | 1″PF veya 3/4″PF | IP65 veya IP67 | -40…+100°C |
- SC28000 modeli için: 20-250Vac/dc besleme ve temassız elektronik switch çıkışı
- SC28100 modeli için: 12-55Vdc besleme ve PNP/NPN çıkışı
- SC28000 modeli için: 1″PF bağlantı
- SC28100 modeli için: 3/4″ PF bağlantı
- Farklı yoğunluklar için hassasiyet ayarı
- Sıvı, toz ve katı uygulamalar için uygun
- LED durum göstergeleri
- Kalibrasyon gerekmez
- IP65 (DIN43650 soketli) veya IP67(M12 soketli) koruma sınıfı
| Brand |
Finetek |
|---|---|
| Besleme Voltajı ve Çıkış |
SC28000 için: 20 ~ 250 Vac/ Vdc 2 telli temassız elektronik switch |
| Çatal Uzunluğu |
40mm |
| Ortam Sıcaklığı |
-40~85°C |
| Ortam Nemi |
80% RH yoğunlaşmamış |
| Depolama Sıcaklığı |
-40~85°C |
| Çalışma Sıcaklığı |
-40~+100°C |
| Maksimum Basınç |
40 Bar |
| Algılanan minimum malzeme yoğunluğu |
Katı:yoğunluk: ≥0.07g/cm³ |
| Manyetik Test |
Çıkış fonksiyon testi, belirtilen noktaya yakın mıknatıs koyarak yapılır |
| Titreşim Frekansı |
350~370Hz |
| Durum Göstergesi |
Yeşil ışık: güç kaynağını gösterir |
| Gövde Malzemesi |
SUS304 |
| Çatal Malzemesi |
SUS304 |
| IP Koruma Sınıfı |
IP65 (DIN43650 soketli) veya IP67(M12 soketli) |
| Elektriksel Bağlantı |
DIN 43650 veya M12 soket |
| Mekanik Bağlantı |
SC28000 için: 1" PF |
- Çeşitli katı / sıvı ile doldurulmuş tankların veya tüplerin maksimum ve minimum seviye tespiti
- Tankların boş veya dolu durumlarının kontrol edilmesi
- PLC / DCS seviye algılama girişi
- Plastik veya metalik tanklarda seviye tespiti
- Kompakt ve küçük tanklar ve çevre
Benzer Ürünler
Various immersion length options from 75 mm to 1500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) Various analog output options Maximum reliability thanks to high-quality reed contacts Fast and easy installation
| Immersion Length | Output Signal | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1500mm | 4...20mA (2 wire), 0...10VDC, 0...5VDC, Ratiometrik | G1/2’’, G1”, G1-1/2’’, G2, M20x1,5 | IP65 |
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 secondsMaximum 0.8 bar working pressure 3 different sensitivity settings Relay output 220VAC or 24VDC powered version IP65 protection class Robust housing
The TLS 110 and TLS 210 series motor level sensors are commonly used to determine the lower and upper positions of the level in areas such as Silo, Warehouse, etc., or intermediate values if desired
| Working Pressure | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| Maximum 0.8 Bar | G1½" and G2½" | Relay(microswitch) | IP65 |
Suitable for temperatures up to +200ºC 1 RPM rotation speed Material density of 0.3 g/cm3 Switch output 24VDC supply IP65 protection class
Economic solution; gasket design prevents dust accumulation; also suitable for high temperature applications| Operating Temperature | Output | Protection | Datasheet |
|---|---|---|---|
| -40ºC ... +200ºC | Switch | IP65 |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit output| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C |
Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors



