MSS Series Rotary Paddle Level Switch || ATEK ||
0.5~1.0KG-cm torque
1 RPM speed
SPDT switch output
220VAC or 24VDC supply
IP65 protection class
Pedal type options
MSS series rotary paddle switches are used for level control in silos and tanks where materials with solid particles are stored. Full and empty signals can be received by performing level control in many demanding applications with different pedal varieties in a safe manner. They can be connected horizontally and vertically.
| Torque | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| 0.5~1.0KG-cm | 1-1/2” PT | SPDT Switch | IP65 |
- Has a good shaft sleeve seal design, which eliminates the phenomenon of fine powder jamming, making the measurement more reliable
- Rugged enclosure for any environment in the wild
- Imported instrument motor, long life and reliable action
- A variety of customized products are available, and the selection is no longer difficult
- Four torque adjustment gears, suitable for most specific gravity materials
| Brand |
Atek |
|---|---|
| Supply Voltage |
220VAC, 24VDC, 50/60 Hz |
| Power Consumption |
3W |
| Output contact |
SPDT / 3A / 250VAC |
| Speed |
1 RPM |
| Torque |
0.5~1.0KG-cm |
| Process connection |
JIS65A 5K flange, 1”PF |
| Operating temperature |
-10~90°C |
| Junction box |
Aluminum / IP65 |
| Inlet |
½ “PF |
| Applicable specific gravity |
0.5 |
- Plastic Industry; PVC, PVDF, PP granular etc.
- Food Industry; Grain Dust, Ground Corn, Sugar-Granulated, Cacao, Malt-Graoung Dry, Sunflower Corn, Whead, Peanuts-Shelled, Clays- Kaoline, Talcum Powder, Ground-Paprika, Coffee-Roasted etc.
- Build Industry; Rocks-Limestone Crushed, Lime, Cement Powder, Rubber Ground, Lime Hydrate Dust, Calsium Dust, Iron Chips, Silica Sand, Moulding Sand, Styrofaam etc.
- Wood Industry; Wooden Fiberst, Saw Dust etc..
- Other Chemistry Industry; Coal Lump, Ash-Coal Dry etc.
Benzer Ürünler
Various immersion length options from 75 mm to 1500 mm Wide range of customizable features (mechanical connection type, electrical connection, material type, etc.) Various analog output options Maximum reliability thanks to high-quality reed contacts Fast and easy installation
| Immersion Length | Output Signal | Process Connection | Protection | Datasheet |
|---|---|---|---|---|
| Different options from 75 to 1500mm | 4...20mA (2 wire), 0...10VDC, 0...5VDC, Ratiometrik | G1/2’’, G1”, G1-1/2’’, G2, M20x1,5 | IP65 |
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 secondsShaft with length of 15, 30, 50 cm Aluminium housing Switch output 220VAC or 24VDC supply IP65 protection class Exproof, Atex marking
Atex certified, suitable for use in explosive environments, ex-proof propeller level control sensor for powder or granules| Operating Temperature | Body | Output | Protection | Datasheet |
|---|---|---|---|---|
| -10ºC ... +60ºC | Aluminium | Switch | IP65 |
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
| Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit output| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C |




































