Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
CLS 211 Capacitive Level Sensor || ATEK || Made in Türkiye
Suitable for mineral oils
Alarm delay time between 0-40 seconds can be selected at the ordering stage
40 Bar pressure resistance
Sink (NPN) or source (PNP) output type
High accuracy and stability
IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds
| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C … +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 |  |
- Suitable for mineral oils
- Alarm delay time between 0-40 seconds can be selected at the ordering stage
- 40 Bar pressure resistance
- Sink (NPN) or source (PNP) output type
- IP67 protection class
| Brand |
Atek |
|---|---|
| Supply Voltage |
9-36VDC |
| Supply Current |
<9mA |
| Max. Load current |
1A (sink), 20mA (source) |
| Alarm delay time |
Standard: 10 sn |
| Connection |
4 way Delphi Packard Metri-Pack 150 series connector |
| Power up delay |
0…10sn (factory set) |
| Power up state |
“In liquid” or “out of liquid” (factory set) |
| Short circuit protection |
Yes |
| Reverse polarity protection |
Yes |
| Overload protection |
Yes |
| Output type |
Sink (NPN) or source (PNP) |
| Output state |
Sink: normally open / normally closed (in liquid) (factory set) |
| Body |
Brass |
| Probe |
PTFE |
| Terminals |
Brass, tin plated |
| Seals |
FVMQ |
| Mechanical Connection |
1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 |
| Protection |
IP67 (with mating connector fitted) |
| Max. Pressure |
40 Bar |
| Temperature Range |
Fluid: -40°C … +130°C |
Mineral oils compatible with brass, PTFE and FVMQ, typically used in motors or hydraulic actuators.
- Deck and Mobile Cranes
- Firefighting Equipment
- Forwarders
- Hydraulic Presses
- Marine Steering Units
- Power Packs
- Waste Management
- Dump and Fork Lift Trucks
- Excavators
- Harvesters
- Waste Balers
- Reach Stackers
- Wheeled Loaders
- Drilling Equipment
- Industrial Power Units
Benzer Ürünler
AISI 316L stainless steel body Different level measurements from 1 meters to 100 meters 4-20mA, 0-10 VDC or 0.5-4.5 VDC analog output options Suitable for oils and fuels ±%0,2 accuracy IP68 protection class Compact structure
Standard diaphragm; submersible level transmitters; durable for harsh conditions; 316L stainless steel body; high precision; EMC and reverse polarity protection, Suitable for applications such as oils and fuels| Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|---|---|
|
Between 0-100 mbar and 0-25 bars
From 1 meter to 100 meters depth |
AISI 316L | Viton (FKM) | 4-20 mA, 0-10 VDC, 0.5-4.5 VDC | IP68 | %0,2 | |
Suitable for water and water based liq Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in water and water based liquids, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Water and Water based liquids | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP65 protection class Pedal type options
MSS series rotary paddle switches are used for level control in silos and tanks where materials with solid particles are stored. Full and empty signals can be received by performing level control in many demanding applications with different pedal varieties in a safe manner. They can be connected horizontally and vertically.| Torque | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| 0.5~1.0KG-cm | 1-1/2” PT | SPDT Switch | IP65 | |
Non-contact liquid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid) Measuring range up to 30m Easy Setup via Bluetooth Small emitting angle ±3.5° 4-20mA + RS485 output G1,5 connection IP67 protection
Ideal for non-contact liquid level measurement in simple applications. It is especially suitable for open channel applications. It can also be used in some liquid tanks and containers.With Bluetooth feature, it allows level reading and adjustment without approaching the tank or hazardous area.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid) | 4-20 mA + RS485 | IP67 | ±2 mm | |
Min. material density sensed; 0.04g/cm³ 2xSPDT relay output SUS304/SUS316/SUS316L rod from 160mm to 6000mm Aluminum housing material LED status indicator IP65 protection class
| Min. material density sensed | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| ≥0.04 g/cm³ | 2 x SPDT Relay | 1"PT | IP65 | -40...+150°C | |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit output| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C | |