Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
APS 27 Mechanical Plunger Switch || ATEK || Made in Türkiye
Resistant to most oils, fuels, hydraulics, dust and solvents
Mechanical switch for 10mA – 5A at 9-32VDC
Vibration (5G) resistant
Designed to allow both vertical and angular movement
Standard NC, optional NO switch output
Industry standard AMP superseal connector
IP69K protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems
| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C … +150°C | 27mm | NC or NO | IP69K |  |
- Resistant to most oils, fuels, hydraulics, dust and solvents
- Mechanical switch for 10mA – 5A at 12-24V/li>
- Vibration (5G) resistant
- Designed to allow both vertical and angular movement
- Standard NC, optional NO switch output
- Industry standard AMP superseal connector
- IP69K protection class
| Brand |
Atek |
|---|---|
| Temperature Range |
-40°C … +150°C |
| Body Material |
11SMn30Pb (Plating:ZN-Ni) |
| Actuation pin |
AISI 304L |
| Cable Material |
POM |
| Contact Output Type |
NC (standard), NO (optional) |
| Vibration |
5g / 100 -1000Hz |
| Actuation |
Axial or side |
| Axial Force |
At switch point : 10 – 20N |
| Mechanical Life |
1.2 million cycles |
| Operating Pressure |
1 BAR |
| Voltage Range |
12V – 24V |
| Current Range |
10mA – 5A |
| Max. Load |
135W |
| Max. Tightening |
50Nm |
| Electrical Connection |
AMP 282080-1 connector |
| Protection |
IP69K |
Mechanical switches are used in commercial vehicles, industrial equipment, conveyor systems, etc. It is used to detect last positions and give output for many different situations that may occur in systems.
Benzer Ürünler
Spring-return (self-return) 60°, 110° or 120° electrical angle 120° or 150° limited mechanical angle M6x1 threaded shaft (optional others) 30 mm body diameter Potentiometric output ±%1 linearity 2 million cycyles lifetime IP67 protection
Rotary potentiometer with spring return; Up to 2 million movement life; Self-return feature; potentiometric output, high protection class| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| Electrical Ang: 60°, 110°, 120° Mechanical Ang: 120°, 150° |
M6x1 |
30 mm |
Potentiometric |
IP67 |
±%1 | |
II 1G Ex ia IIC T4/T6 Ga II 1D Ex ia IIIC T120°C / T85°C Da ATEX ve IECEx Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust) Different models available from 100 mBar to 600 Bar nalog output (4-20mA / 0-10V, etc.) or CANopen output ±%0,3 F.S accuracy IP65 or IP67 protection Compact design
ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,3 F.S | 22mm | |
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 | |
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
Non-contact distance measurement with laser (TOF) 940 nm invisible laser (VCSEL), Class 2 2000mm mesauring range 12mm small body diamater Analog, CANopen, MODBUS and switch output options IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface options| Measuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 | |
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |