Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
ASM10 Siesmic Earthquake Panel || ATEK || Made In Türkiye
Shaking detection in 3 axes
Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings.
Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored
4 dry contact relay outputs (220VDC/250VAC or 24VDC);
Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire
Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure
| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1…7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC |  |
ASM 20 Seismic Earthquake Sensors have very sensitive sensors that can detect seismic movements in three axes (x,y,z,). It detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.
Additionally, there is 1 fire/gas detector input and 1 fire alarm button input on the device. If desired, a fire alarm button can be connected to the button input, and a gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.
The device has 4 dry contact relay outputs. 2 of the relay outputs are activated during an earthquake and 2 of them are activated when an alarm comes from an externally connected button or detector.
- Shaking detection in 3 axes
- Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings.
- There is 1 fire/gas detector input and 1 fire alarm button input on the sensor. If desired, you can connect the fire alarm button to the button input; Gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.
- 24VDC supply voltage
- 4 dry contact relay outputs (220VDC/250VAC or 24VDC);
Earthquake relays are activated when an earthquake is detected,
- Fire relays are activated when an alarm comes from the external gas/fire detector or fire button input.
- Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire
- Robust and durable
- Small structure, easy mounting
| Brand |
Atek |
|---|---|
| TECHNICAL FEATURES |
–> |
| Operating Voltage |
12-24 VDC |
| Quiescent Current |
20mA @24VDC |
| Alarm Current |
150mA @24VDC |
| Detection Plane |
X, Y, Z (3 axis) |
| Frequency Sensitivity Range |
1…7,7Hz |
| Min. sensitive acceleration threshold |
+/- 40 mg |
| External Inputs |
1 x alarm button |
| Relay Output |
4 x dry contact relays |
| Buzzer |
85dB/1m |
| Operating Temperature |
-10°C … +60°C |
| Relative humudity |
%10…%90 non-condensing |
| Housing Material |
Metal |
ASM 20 Seismic Earthquake Sensors have very sensitive sensors that can detect seismic movements in three axes (x,y,z,). It detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.Additionally, there is 1 fire/gas detector input and 1 fire alarm button input on the device. If desired, a fire alarm button can be connected to the button input, and a gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.
Benzer Ürünler
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm | |
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NC, optional NO switch output Industry standard AMP superseal connector IP69K protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systems| Voltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 12-24V / 10mA-5A | -40°C ... +150°C | 27mm | NC or NO | IP69K | |
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4 | IP65 or IP67 | |
Non contact – Hall effect measurement Dual axis CANopen or analog output Configurable button and grip options 11 bit resolution IP67 protection
Non contact hall-effect measurement technology; dual axis; CANopen or analog output; ergonomic structure; precise control; configurable button and grip options| Resolution | Axis | Angle of Movement | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 11 Bit | 2 axis (X,Y) | ±20° | CANopen or Analog | IP 67 | |
Provides optical isolation between the encoder signal and PLC, servo driver or other input devices Can change the encoder's signal voltage to match the receiver input Converts non-differential output (A, B, Z) to differential output (A, B, Z, A/, B/, Z/) Converts differential output (A, B, Z, A/, B/, Z/) to non-differential output (A, B, Z) Converts open collector output to differential or non-differential output Easy mounting on panels with DIN Rail system
Versatile interface between incremental encoder and receiving devices; Ability to convert non-differential signal to differential, differential signal to non-differential; cleaning noisy signals; adjusting the encoder signal voltage according to the receiver; DIN rail system| Isolator Output Type | Isolator Input Type | Isolator Signal Input Voltage | Output Speed | Isolator Output Voltage | Datasheet |
|---|---|---|---|---|---|
| A, B, Z, A/, B/, Z/ Quadrature | Differential line driver Non-differential line driver, non-differential open collector | 5-30VDC (TTL, RS422, Line Driver) | 1 Mhz Max | 5VDC differential line driver, 5-24VDC differential line driver | |