Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
ASM10 Siesmic Earthquake Panel || ATEK || Made In Türkiye
Shake detection in 3 axes
Keeping the last 100 earthquake events in memory and viewing them from the menu
Automatic offset feature
Up to 24 hours of operation with internal battery for situations such as power outages
Programmable 4 dry contact relays and 12V 5A solenoid output
7 language options (Turkish, English, German, Spanish, Portuguese, Italian, Dutch)
Shake detection in 3 axes; automatically cut off gas and energy and stop the elevator in case of an earthquake; 4 programmable dry contact relays and 1 12V 5A solenoid output; Visual and audible warning in case of earthquake; 100 event log memories; up to 24 hours of operation on battery during power outages; easy installation and use with user-friendly interface
| Detection Plane | Frequency Range | Output | Supply Voltage | Battery Capacity | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1…7,7Hz | 1 x 12VDC 5A solenoid 4 x dry contact relay (250V 10A) |
85-305 VAC, 47-440 Hz | 12VDC, 2.2Ah |  |
ASM 10 Earthquake Sensor detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as gas valves, generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LCD screen and LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.
It performs the following functions during an earthquake:
• A loud alarm sounds to alert you. Thus, it allows you to wake up especially during sleep.
• It cuts your gas. For example, if your stove is on, it cuts off the gas and turns off the stove. Thus, it provides protection against the risk of explosion.
• To prevent you from being stuck in a moving elevator, it stops the elevator at the nearest floor and opens its doors.
• It cuts off your electricity, thus preventing the risk of fire due to electricity.
Our product can perform all of these functions at the same time, or it can only perform the functions you want. For example, during an earthquake, you can only give an alarm and not use other functions.
• Shake detection in 3 axes
• Keeping the last 100 earthquake events in memory and viewing them from the menu
• Automatic offset feature
• Up to 24 hours of operation with internal battery for situations such as power outages
• Color LCD display and status LEDs
• Audible and visual warning in case of earthquake or error
• To automatically cut off gas and energy in case of an earthquake;
4 dry contact relays (2 standard, 2 optional) that can be set in different functions and1 12V 5A solenoid output
• Gray or red color option
• 7 language options (Turkish, English, German, Spanish, Portuguese, Italian, Dutch)
• Sturdy and durable structure
• Easy installation
| Brand |
Atek |
|---|---|
| Operating Voltage |
85-305 VAC, 47-440 Hz |
| Quiescent Current |
19mA @230 VAC |
| Power Drawn |
4,37W @230 VAC (typical) |
| Battery Charging Voltage |
14V (+/-0.2V) |
| Current Drawn from the Battery |
From 12V Battery (While 0 full): |
| Battery Capacity |
12VDC, 2.2Ah |
| Operating Time from Battery |
≤24 hours |
| Detection Plane |
X, Y, Z (3 axis) |
| Frequency Sensitivity Range |
1…7,7Hz |
| Min. sensitive acceleration threshold |
+/- 40 mg |
| Relay Output |
4 x dry contact relays (250V 10A) (2 standard, 2 optional) |
| Solenoid Output |
1 x 12VDC 5A |
| S. Valve energization in case of alarm |
It detects in 5 seconds or less. Typically detection occurs in under 1 sec. |
| Solenoid connection cable thickness and distance |
0.57mm x 2 TTR / 20m max. |
| Buzzer |
85dB/1m |
| Operating Temperature |
-10°C … +60°C |
| Relative Humidity |
… non-condensing |
| Housing Material |
Metal |
ASM 10 Earthquake Sensor detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as gas valves, generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LCD screen and LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.It performs the following functions during an earthquake:• A loud alarm sounds to alert you. Thus, it allows you to wake up especially during sleep.• It cuts your gas. For example, if your stove is on, it cuts off the gas and turns off the stove. Thus, it provides protection against the risk of explosion.• To prevent you from being stuck in a moving elevator, it stops the elevator at the nearest floor and opens its doors.• It cuts off your electricity, thus preventing the risk of fire due to electricity.
Benzer Ürünler
60°, 90°, 345°, 350°, 355° electrical angle 6 mm shaft diameter ±0.5% linearity 1000 RPM operating speed Long life up to 10 million movements IP40 protection class
Rotary potentiometer with shaft; synchro size 20; movement life up to 10 million ; infinite and continuous rotation; 2 or 3 potentiometric outputs in one product| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 60°, 90°, 345°, 350°, 355° |
6 mm |
52.8 mm |
Potentiometric (2 or 3 outputs) |
IP40 |
±0.5% | |
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds| Application | Max Pressure | Temperature Range | Output Type | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Mineral oils | 40 bar | -40°C ... +125°C | Sink (NPN) or Source (PNP) | 1/4”NPTF, 3/8”NPTF, 1/2”NPTF, 1/2”BSPP, 1/2”BSPT, M14x1.5, M18x1.5 | IP67 | |
Non-contact distance measurement with laser (TOF) 940 nm invisible laser (VCSEL), Class 2 2000mm mesauring range 12mm small body diamater Analog, CANopen, MODBUS and switch output options IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface options| Measuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 | |
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…10 bar to 0…2000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt.others) Pressure: 10... 2000 bar (opt.others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4 | IP65 or IP67 | |
Shaking detection in 3 axes Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings. Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored 4 dry contact relay outputs (220VDC/250VAC or 24VDC); Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire Small structure, easy mounting
Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure| Detection Plane | Frequency Range | Input | Output | Supply Voltage | Datasheet |
|---|---|---|---|---|---|
| X, Y, Z (3 axis) | 1...7,7Hz | 1 x button and 1 x fire/gas dedector with relay | 4 x dry contact relay (24VDC 1A or 220VDC/250VAC 2A) | 12-24VDC | |