Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
LMS Series Laser Distance Sensor || ATEK || Made in Türkiye
Non-contact distance measurement with laser (TOF)
940 nm invisible laser (VCSEL), Class 2
2000mm mesauring range
12mm small body diamater
Analog, CANopen, MODBUS and switch output options
IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface options
| Measuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 |  |
- Non-contact distance measurement with laser (Time of Flight)
- 2000mm mesauring range
- 12mm small body diamater
- Analog, CANopen, MODBUS and switch output options
- LED status indicator
- Resistant to environmental conditions, IP67 protection class
- Long service life
- Low power consumption
| Brand |
Atek |
|---|---|
| Working Principle |
Time-of-Flight, reflected from reflector |
| Measuring Range |
0…2000mm |
| Light Type |
Invisible Laser (VCSEL), Class2 |
| Wavelength |
940 nm |
| Field Of View |
18° |
| Recommended Reflector Size |
5x5cm for distance ≤1000mm |
| Max. Permissible external light |
1000 lux (effected by intense sunlight) |
| Supply Voltage |
Analog: 12…30 Vdc |
| Output Types |
Analog : 0-10V, 0-5V, 0.5-4.5V, 0-20mA, 4-20mA |
| Power Consumption |
0,24 Watt max. |
| Current Consumption |
10mA @24VDC max |
| Sampling Rate |
Analog, CANopen, RS-485 : 20Hz |
| Minimum Resolution |
1 mm |
| Accuracy |
±%2 |
| Analog output load |
500 Ω |
| Analog output resolution |
12 Bit (1 mm resolution) |
| Indicator |
RGB LED |
| Reverse connection protection |
Yes |
| Temperature compensation |
Yes |
| Watchdog |
Yes |
| Electrical connection |
Cable or M12 connector |
| Material |
Nickel plated brass |
| Operating temperature |
-20…+85°C |
| Storage temperature |
-20…+85°C |
| Protection class |
IP67 |
- Distance measurement
- Asset control
- Motion control
- Positioning
- Obstacle detection
- Altitude monitoring
Benzer Ürünler
60°, 90°, 345°, 350°, 355° electrical angle 6 mm shaft diameter ±0.5% linearity 1000 RPM operating speed Long life up to 10 million movements IP40 protection class
Rotary potentiometer with shaft; synchro size 20; movement life up to 10 million ; infinite and continuous rotation; 2 or 3 potentiometric outputs in one product| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| 60°, 90°, 345°, 350°, 355° |
6 mm |
52.8 mm |
Potentiometric (2 or 3 outputs) |
IP40 |
±0.5% | |
Spring-return (self-return) Bidirectional Electrical Angle: ±60° (Total 120°) Bidirectional Mechanical Angle: ±62,5° (Total 125°) (There is a 5° dead zone in the center) 6 mm shaft (optional others) 36 mm body diameter Potentiometric output ±%1 linearity 2 million cycyles lifetime IP54 protection
Rotary potentiometer with spring return; Up to 2 million movement life; Self-return feature; Bidirectional potentiometric output| Measuring Range | Shaft Diameter | Body Diameter | Output Type | Protection | Linearity | Datasheet |
|---|---|---|---|---|---|---|
| Electrical Ang: ±60° ( total 120°) Mechanical Ang:±62,5° (Total 125°) |
6 mm |
36 mm |
Potentiometric |
IP54 |
±%1 | |
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm | |
Pressure Measurement, Pressure Transmitters, Temperature Measurement, Temperature Sensors and Transmitters, New Products
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection options| Measuring Range | Output | Mechanical Connection | Protection | Datasheet |
|---|---|---|---|---|
| Temperature: -40ºC ... +150ºC (opt. others) Pressure: 6... 1000 bar (opt. others) | 4-20mA, 0-10V, 0.5-4.5V Ratiometric, RTD | G1/4, G1/2, NPT1/4, NPT1/2, M14x1 vb. | IP65 or IP67 | |
Detection of ferrous metal objects by inductive principle 17x17mm, 25x25mm and 30x30mm models Rectangular type DC 2-wire or 3-wire LED status indicator IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
| Body Dimensions (mm) | Sensing Distance | Setting Distance | Output Type | Protection | Datasheet |
|---|---|---|---|---|---|
| 17x17 25x25 30x30 | 17x17:0 … 8 mm 25x25:0 … 8 mm 30x30:0 … 15 mm | 17x17:0 … 5.6 mm 25x25:0 … 5.6 mm 30x30:0 … 11 mm | 2-wire 3-wire NPN 3-wire PNP | IP67 | |
Non contact – Hall effect measurement Dual axis CANopen or analog output Configurable button and grip options 11 bit resolution IP67 protection
Non contact hall-effect measurement technology; dual axis; CANopen or analog output; ergonomic structure; precise control; configurable button and grip options| Resolution | Axis | Angle of Movement | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| 11 Bit | 2 axis (X,Y) | ±20° | CANopen or Analog | IP 67 | |