IPS 200 Series Proximity Sensors || ATEK || Made in Türkiye
Detection of ferrous metal objects by inductive principle
17x17mm, 25x25mm and 30x30mm models
Rectangular type
DC 2-wire or 3-wire
LED status indicator
IP67 protection
Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; rectangular body; various body dimension options; long service life
- Non-contact detection of ferrous metal objects by inductive principle
- 17x17mm, 25x25mm and 30x30mm models
- DC 2-wire or 3-wire
- High sensivity, fast feedback
- LED status indicator
- IP67 protection class
- Long service life
Brand |
Atek |
---|---|
Measuring Type |
Inductive, non-contact |
Sensing Distance (Sd) |
17 x 17 mm : 0 … 8 mm |
Setting Distance |
17 x 17 mm : 0 … 5.6 mm |
Standard Sensing Target |
17 x 17 mm : 25x25x1 |
Sensing Object |
Ferrous Metal |
Hystresis |
10% of Sensing distance (Sd) max. |
Supply Voltage |
10…30 VDC (reverse polarity protection) |
Current Consumption |
3-wire (PNP/NPN) : ≤15 mA |
Leakage current, open state |
2-wire: ≤1 mA |
Switching capacity |
3-wire : ≤200 mA with overload and short-circuit protection |
Voltage drop, closed state |
3-wire : ≤1,5 V |
Internal Pull Up / Pull-Down Resistance |
3-wire:22K |
Response Frequency |
3-wire : 2 kHz |
First up delay |
3-wire : 20ms |
Electrical Connection |
3 x 0.14mm² PVC cable (Ø4,5 ± 0,10 mm) |
Status Indicator |
If there is a target : blue |
Protection |
IP67 |
Operating Temperature |
-20…+70°C |
Material |
Body: Plastic |
In the automation industry;
- Position monitoring of machine parts
- Counting metal objects
Benzer Ürünler
Thin-film steel diaphragm structure 23 mm diameter stainless steel housing Different options up to 1000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact designPressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
---|---|---|---|---|---|
Different options up to 1000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 23mm |
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NO, optional NC switch output IP67 protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systemsVoltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
---|---|---|---|---|---|
12-24V / 10mA-5A | -40°C ... +150°C | 26mm | NC or NO | IP67 |
Resistant to most oils, fuels, hydraulics, dust and solvents Mechanical switch for 10mA - 5A at 9-32VDC Vibration (5G) resistant Designed to allow both vertical and angular movement Standard NC, optional NO switch output Industry standard AMP superseal connector IP69K protection class
Oil, fuel, hydraulic and dust resistant; resistant to vibrations; commercial vehicles, industrial equipment, conveyor systems, etc. Status detection and output for many different situations that may occur in systemsVoltage and Current Range | temperature Range | Body Diameter | Output | Protection | Datasheet |
---|---|---|---|---|---|
12-24V / 10mA-5A | -40°C ... +150°C | 27mm | NC or NO | IP69K |
Non-contact distance measurement with laser (TOF) 940 nm invisible laser (VCSEL), Class 2 2000mm mesauring range 12mm small body diamater Analog, CANopen, MODBUS and switch output options IP67 protection class
Precise non-contact distance measurement and approximation detection with laser beam; small and compact structure; Analog, switch, CANopen or MODBUS interface optionsMeasuring Range | Output | Field of View | Accuracy | Protection | Datasheet |
---|---|---|---|---|---|
2000 mm | 4-20 mA, 0-20 mA, 0-10V, 0-5V, CANopen, RS-485, PNP Open Collector | 18° | ±%2 FS | IP67 |
Pressure and temperature measurement with a single sensor Completely welded thin-film steel diaphragm structure that does not require o-ring Pressure measuring range options from 0…6 bar to 0…1000 bar (optional others) -40 … +150°C temperature measurement (optional others) 0-20 mA, 4-20mA, 0-10V, 0.5-4.5V Ratiometric, PT100, PT1000 output options G1/4, G1/2, NPT1/4, NPT1/2, M14x1 process connection options High accuracy and stability
Measurement of both pressure and temperature via a single sensor; Fully welded Thin-film steel diaphragm structure that does not require O-rings; high sensitivity; EMC and reverse polarization protection; wide range of analog output and mechanical connection optionsShake detection in 3 axes Keeping the last 100 earthquake events in memory and viewing them from the menu Automatic offset feature Up to 24 hours of operation with internal battery for situations such as power outages Programmable 4 dry contact relays and 12V 5A solenoid output 7 language options (Turkish, English, German, Spanish, Portuguese, Italian, Dutch)
Shake detection in 3 axes; automatically cut off gas and energy and stop the elevator in case of an earthquake; 4 programmable dry contact relays and 1 12V 5A solenoid output; Visual and audible warning in case of earthquake; 100 event log memories; up to 24 hours of operation on battery during power outages; easy installation and use with user-friendly interfaceDetection Plane | Frequency Range | Output | Supply Voltage | Battery Capacity | Datasheet |
---|---|---|---|---|---|
X, Y, Z (3 axis) | 1...7,7Hz | 1 x 12VDC 5A solenoid 4 x dry contact relay (250V 10A) | 85-305 VAC, 47-440 Hz | 12VDC, 2.2Ah |