PCS 10 Adjustable Pressure Switch || ATEK ||
Back to products
ARC H 50 K Hollow Shaft || ATEK || Made in Türkiye

BCX 22 Exproof Pressure Transmitter || ATEX Certificate || Made in Türkiye

Click to enlarge
Atek

II 1G Ex ia IIC T4/T6 Ga
II 1D Ex ia IIIC T120°C / T85°C Da
ATEX ve IECEx
Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust)
Different models available from 100 mBar to 600 Bar
nalog output (4-20mA / 0-10V, etc.) or CANopen output
±%0,3 F.S accuracy
IP65 or IP67 protection
Compact design

ATEX certified for use in explosive atmospheres; high accuracy; protected against EMC and reverse polarity; small and compact design


Datasheet
TR
EN
 Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0…100mbar to 0…600bar  Different vacuum models from 0…-100mbar to 0…-1bar 4-20 mA, 0-10 VDC, Ratiometric or CANopen IP65 or IP67 ±%0,3 F.S  22mm
  • II 1G Ex ia IIC T4/T6 Ga
  • II 1D Ex ia IIIC T120°C / T85°C Da
  • ATEX and IECEx
  • Ex zones 0, 1, 2 (gas); 20, 21, 22 (dust)
  • Piezoresistive principle
  • Different models from 100 mBar to 600 Bar
  • Analog 4-20mA / 0-10V etc. or CANopen output
  • A wide variety of mechanical connection options
  • Excellent long-term performance
  • Small and compact design
Brand

Atek
Measuring range

Diffrent models from 0…100mbar to 0…600Bar
Different vacuum models from 0… -100mbar to 0…-1Bar
Working Principle

Piezoresistive
Maximum Pressure Strength

300%F.S. ≤700mbar, 200%F.S. <250Bar, 150%F.S ≥250Bar
*Can be 3 or 5 times.
Oring – Sealing

Standard NBR, optional FKM(Viton) or EPDM
Supply Voltage

4-20 mA: 8 … 32 VDC
0-10 V: 12 … 30 VDC
Ratiometric: 5 VDC
CANopen: 8…26 VDC
Current Consumption

30mA max.
Output Signal

4…20mA (2-wire)
0…10VDC
0.5-4.5 VDC Ratiometric, 0-5 VDC Ratiometric
CANopen
Accuracy

±%0,3 F.S @25ᵒC
Response Time

25ms (standard) … nominal pressure
1ms, 5ms, 125ms (optiona
Operating Temperature

-40°C…+85°C
Body Material

Stainless steel body – 1.4305 (AISI303)
Optional stainless 316L or Titanium
Electrical Connection

DIN43650-A, DIN43650-C or M12 connector
Protection Class

IP65 or IP67
**If M12 plug-in models use a press-pressed plug cable
Mounting / Tightening

15 … 20 Nm
Approval / Conformity

ATEX / IECEx, according to the norm EN IEC 60079-0:2018 / EN 60079-11:2012
  • Ex Zones 0, 1, 2 (gas); 20, 21, 22 (dust)
  • Pneumatic Systems
  • Hydraulic Systems
  • Machines Equipments
  • Air Cooling – Heating Systems
  • Water Technologies
  • Automation Applications
DATASHEET
PDF
PDF
USER MANUAL
PDF
PDF
ATEX CERTIFICATE
PDF

Benzer Ürünler
NAT 8252 Pressure Transmitter || TRAFAG || Swiss Made
,

Thin film steel diaphragm Stainless steel body Options from 0 ... 2,5 bar to 0 ... 600 bar ±0.5% FS sensitivity Different analog output options Optional switching output IP 65, IP67 or IP68 protection class

Pressure transmitter with steel diaphragm; High durability and unaffected by environmental conditions thanks to its one-piece welded, leak-proof body; very small compact design


Datasheet
Measuring Range Output Protection Accuracy Datasheet
0 ... 2.5 to 0 ... 600 bar 4-20 mA, 0-10 VDC, 0.5-4.5 VDC ratiometric, 0-5 VDC, 1-6 VDC, optional switching output
IP65, IP67, IP68
 ±%0.5 FS
Quick view
BCT 26 Pressure Transmitter || ATEK || Made in Türkiye
,

Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design


Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. IP65 or IP67 ±%0,3 F.S  26mm
Quick view
FPT 8236 Flush Membrane Pressure Transmitter || TRAFAG || Swiss Made
,

Thin film steel diaphragm, flush membrane Stainless steel body Options from -0.5 ... 0.5 bar to 0 ... 100 bar ±0.5% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class

Pressure transmitter with steel diaphragm and flush membrane; one-piece welded sealing body for high durability and resistance to ambient conditions; very small compact design; special smooth and flat flush membrane


Datasheet
Measuring Range Output Protection Accuracy Datasheet
-0.5 ... 0.5 to 0 ... 100 bar 4-20 mA, 0-10 VDC, 0-5 VDC, 1-6 VDC, 0.5-4.5 VDC ratiometric
IP65, IP67, IP68
 ±%0.5 FS
Quick view
BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||
,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view
BT10-212 Flush Pressure Transmitter with Flange || ATEK ||
,

-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight

BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.


Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
-1bar…0~0.002bar…100bar 4-20mA, 4-20mA+HART IP 65 ±0.3%FS
Quick view
DPS 2 Series Pressure Switch With Display || ATEK ||
,

Pressure switch with display -1 bar...10 bar pressure range ±2% FS accuracy Analog and transistor output Multiple measuring unit option

Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display
Datasheet
TR
EN
Pressure Range Output Protection Accuracy Datasheet
-1bar ... 10bar 4-20 mA, 1-5 VDC, PNP/NPN Open Collector
 IP40
 ±2% FS
Quick view