SCX6 Vibrating Rod Level Sensor || FineTek
Min. material density sensed; 0.04g/cm³
2xSPDT relay output
SUS304/SUS316/SUS316L rod from 160mm to 6000mm
Aluminum housing material
LED status indicator
IP65 protection class
Min. material density sensed | Output | Connection | Protection | Operating Temp. | Datasheet |
---|---|---|---|---|---|
≥0.04 g/cm³ | 2 x SPDT Relay | 1″PT | IP65 | -40…+150°C |
- 18-30VDC or 100-240VAC supply
- 2 x SPDT relay outputs
- High vibration intensity to reduce the pile-up of materials on the vibrating rod
- Suitable for materials with low specific gravity; it can be as low as 0.04g/cm3
- LED status indicator
- No calibration required
- IP65 protection class
Brand |
Finetek |
---|---|
Supply Voltage |
100~240VAC,50/60 Hz |
Power consumption |
10 VA@100~240VAC input |
Vibration frequency |
About 330~360Hz |
Min. material density sensed |
0.04g/cm³ |
Operating temperature |
-40~150°C |
Ambient temperature |
-40~+85°C |
Operating pressure |
16 BAR |
Signal output |
Relay*2 ( SPDT,5A / 240 VAC;A / 28Vdc ) |
Level sensor housing |
Aluminum / IP65 |
Wetted materials |
SUS304 / SUS316 / SUS316L |
Display |
Green LED light: power indicator |
Protection Class |
IP65 |
Probe length |
160mm / 210mm/ 211-6000mm |
Standard connection |
1"PT |
Level control in cement factories, food industries, flour mills, coal mines, and pharmaceutical factories, among others.
Benzer Ürünler
1.4462 (duplex), 316L or titanium body High corrosion resistance, suitable for use in salt water Different level measurements from 4 meters to 100 meters 4-20mA or 0-10 VDC analog output options ± 0.3% accuracy IP68 protection class
Standard diaphragm; submersible level transmitters; durable for harsh conditions; dublex, 316L or titanium body; high precision; EMC and reverse polarity protection; Suitable for applications such as seawater, saltwater, grey water, waste water etc.
Measuring Range | Membrane | O-Ring | Output | Protection | Accuracy | Datasheet |
---|---|---|---|---|---|---|
Between 0-400 mbar and 0-25 bars From 4 meters to 100 meters depth | Ceramic | NBR | 4-20 mA or 0-10 VDC | IP68 | %0,3 |
Non-contact measurement with ultrasonic principle Different measuring options up to 6 meters Acid-proof option 4-20mA, 0-10V, 0-20 mA analog output options CANopen, RS485, RS232 serial communication options 2 x PNP open collector outputs IP67 protection class
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks; small structure; 316L, delrin or teflon housing options; acid-proof option
Measuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
---|---|---|---|---|---|
Measuring options up to 6 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 10°, 12°, 30° | %0,2 FS | IP67 |
Non-contact liquid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid) Measuring range up to 30m Easy Setup via Bluetooth< Small emitting angle ±3.5° 4-20 mA+HART+RS485 output G1,5 connection IP67 protection
Ideal for non-contact liquid level measurement in simple applications. It is especially suitable for open channel applications. It can also be used in some liquid tanks and containers. With Bluetooth feature, it allows level reading and adjustment without approaching the tank or hazardous area.Measuring Range | Output | Protection | Accuracy | Datasheet |
---|---|---|---|---|
Up to 30 meters (liquid) | 4-20 mA+HART+RS485 | IP67 | ±2 mm |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit outputSupply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
---|---|---|---|---|---|
10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C |