MPTS 123 Melt Pressure Sensor With Flexible Body || ATEK ||

Flexible body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body

Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0…35 to 0…2000 bar Flexible Body 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
  • Flexible body system
  • Better than ±0.5% accuracy
  • 4 – 20mA, 0 – 10V or 3.33mV/V output
  • 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Internal 80% shunt calibration
  • Standard Inconel diaphragm
  • Optional auto-zero function
  • Applications with process temperature of up to 400℃
  • Maximum Torque:30Nm (22lbf ft)
  • Optional safe relay function
Brand

Atek

Pressure Range

0~35 to 2000bar (0~500 to 0~30000psi)

Measurement principle

4-arm bonded foil strain gage Wheatstone bridge

Supply Voltage

4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC
3.33mV/V output models: 10VDC (recommended), 6…12 VDC

Output Signals

4-20 mA
0-10 VDC
3,33 mV/V

Max. diaphragm temp.

400°C

Maximum Overload Pressure Rating

1.5 x FS(<1000bar)
1.2 x FS(>1000bar)

Pressure Units

PSI, Bar, MPa or Kg/cm²

Accuracy

± % 0,5 FS

Repeatability

± % 0,2 FS

Internal Shunt Calibration

% 80FSO ± % 1 FSO

Temperature sensor

No

Electrical Connection

6PIN,7PIN, 8PIN

Max Torque

30Nm

Process Connection

1/2-20 UNF (45° conical seal)
M14x1.5, M18x1.5, M22x1.5

Body

Titanium Nitride

Diaphgram Material

Inconel

MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.

DATASHEET
PDF
PDF