Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||
Flexible body system
Thermocouple (temperature sensor)
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)
| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0…35 to 0…2000 bar | Flexible body with thermocouple | 4-20 mA, 0-10V, 3.33mV/V | 400°C | %0,5 FS |  |
- Flexible body system
- Thermocouple (temperature sensor)
- Better than ±0.5% accuracy
- 4 – 20mA, 0 – 10V or 3.33mV/V output
- 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
- Internal 80% shunt calibration
- Standard Inconel diaphragm
- Optional auto-zero function
- Applications with process temperature of up to 400℃
- Maximum Torque:30Nm (22lbf ft)
- Optional safe relay function
| Brand |
Atek |
|---|---|
| Pressure Range |
0~35 to 2000bar (0~500 to 0~30000psi) |
| Measurement principle |
4-arm bonded foil strain gage Wheatstone bridge |
| Supply Voltage |
4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC |
| Output Signals |
4-20 mA |
| Max. diaphragm temp. |
400°C |
| Maximum Overload Pressure Rating |
1.5 x FS(<1000bar) |
| Pressure Units |
PSI, Bar, MPa or Kg/cm² |
| Accuracy |
± % 0,5 FS |
| Repeatability |
± % 0,2 FS |
| Internal Shunt Calibration |
% 80FSO ± % 1 FSO |
| Temperature sensor |
E, J, K, S type or PT100 |
| Electrical Connection |
6PIN,7PIN, 8PIN |
| Max Torque |
30Nm |
| Process Connection |
1/2-20 UNF (45° conical seal) |
| Body |
Titanium Nitride |
| Diaphgram Material |
Inconel |
MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.
Benzer Ürünler
Ceramic diaphragm Stainless steel body Options from 0 ... 1 bar to 0 ... 400 bar ±0.5% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class Economical and convenient solution Datashee
Pressure transmitter with ceramic diaphragm; economical and durable solution; relative or absolute measurement option
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 1 to 0 ... 400 bar | 4-20 mA, 0-10 VDC, 0.5-4.5 VDC ratiometric, 0-5 VDC, 1-6 VDC | IP65, IP67, IP68 | ±%0.5 FS | |
Thin film steel diaphragm Stainless steel housing, high pressure resistant Measurements from 0 ... 2,5 bar to 0 ... 600 bar High sensitivity of ±0.3% and ±0.5% FS Different analog output options Wide temperature range up to 125°C IP65, IP67 or IP68 protection class
Pressure transmitter with steel diaphragm; one-piece welded sealing body provides high durability and resistance to ambient conditions; very small compact design
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 2.5 to 0 ... 600 bar | 4-20 mA, 0-10 VDC, 0.5-4.5 VDC ratiometric, 0-5 VDC, 1-6 VDC | IP65, IP67, IP68 | ±%0.5 FS, ±%0.3 FS | |
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 or IP67 | ±%0,3 F.S | 26mm | |
Thick film ceramic diaphragm Stainless steel body Options from 0 ... 0.1 bar to 0 ... 6 bar ±0.3% FS accuracy 4-20 mA analog output IP68 protection class
Submersible pressure transmitter with ceramic diaphragm; suitable for pressure measurement of dense and viscous substances; protected against lightning strikes; PUR or PE cable options
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.1 to 0 ... 6.0 bar | 4-20 mA | IP68 | ±%0.3 FS | |
0~0,0025bar…0,01bar…1bar pressure range Suitable for low pressure φ8 agnail connection, easy to install ±0.5%...±3%FS accuracy 4-20 mA analog output IP65 protection class
BFT10-110 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0~0,0025bar…0,001bar…1bar | 4-20mA | IP 65 | ±0.5%...±3%FS | |
Pressure Switch with Indicator Options from 0 ... 2.5 bar to 0 ... 600 bar ±0.5% FS accuracy Analog output options 2 PNP transistor outputs IP67 protection class
Pressure transmitter and switch with indicator in one device; thin film steel diaphragm; Programmable from mobile phone with NFC; current and voltage output option in one device; triple protection against extreme pressures; 2 PNP transistor outputs
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 2.5 to 0 ... 600 bar | 4-20 mA, 0-10 VDC, 0-5 VDC, 1-6 VDC, switchable mA or V, PNP transistor | IP67 | ±0.5% FS | |