Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
MPTS 112 Melt Pressure Sensor With Rigid Body || ATEK || Made in Türkiye
Rigid body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 350℃
Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated rigid body
| Measuring Range | Body Structure | Output | Max. Temp. | Accuracy | Datasheet |
|---|---|---|---|---|---|
| 0…35 to 0…2000 bar kadar | Rigid Body | 4-20 mA, 0-10V, 3.33mV/V | 350°C | %0,5 FS |  |
- Rigid body system
- Better than ±0.5% accuracy
- 4 – 20mA, 0 – 10V or 3.33mV/V output
- 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
- Internal 80% shunt calibration
- Standard Inconel diaphragm
- Optional auto-zero function
- Applications with process temperature of up to 350℃
- Maximum Torque:30Nm (22lbf ft)
- Optional safe relay function
| Brand |
Atek |
|---|---|
| Pressure Range |
0~35 to 2000bar (0~500 to 0~30000psi) |
| Measurement principle |
4-arm bonded foil strain gage Wheatstone bridge |
| Supply Voltage |
4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC |
| Output Signal |
4-20 mA |
| Max. diaphragm temp. |
350°C |
| Maximum Overload Pressure Rating |
1.5 x FS(<1000bar) |
| Pressure Units |
PSI, Bar, MPa or Kg/cm² |
| Accuracy |
± % 0,5 FS |
| Repeatability |
± % 0,2 FS |
| Internal Shunt Calibration |
% 80FSO ±%1 FSO |
| Temperature sensor |
No |
| Electrical Connection |
6PIN,7PIN, 8PIN |
| Max Torque |
30Nm |
| Process Connection |
1/2-20 UNF (45° conical seal) |
| Body |
Titanium Nitride |
| Diaphgram Material |
Inconel |
MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.
Benzer Ürünler
Marine certified With ceramic diaphragm Stainless steel or titanium body Options from 0 ... 0.1 bar to 0 ... 250 bar ±0.3% FS sensitivity 4-20 mA analog output IP65, IP67 or IP68 protection class Economical and convenient solution
Pressure transmitter with ceramic diaphragm; marine certified; economic and durable; relative or absolute measurement option
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.1 to 0 ... 250 bar | 4-20 mA | IP65, IP67, IP68 | ±%0.3 FS | |
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and CANopen output options ±0.5% F.S or ± 0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600bar Different vacuum models from 0...-100mbar to 0...-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,5 F.S (ceramic), ±%0,3 F.S (silicon) | 22mm | |
Thin film steel diaphragm, flush membrane Stainless steel body Options from -0.5 ... 0.5 bar to 0 ... 100 bar ±0.5% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class
Pressure transmitter with steel diaphragm and flush membrane; one-piece welded sealing body for high durability and resistance to ambient conditions; very small compact design; special smooth and flat flush membrane
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -0.5 ... 0.5 to 0 ... 100 bar | 4-20 mA, 0-10 VDC, 0-5 VDC, 1-6 VDC, 0.5-4.5 VDC ratiometric | IP65, IP67, IP68 | ±%0.5 FS | |
Thin film steel diaphragm Stainless steel body Options from 0 ... 2,5 bar to 0 ... 2500 bar ±0.3% FS or ± 0.5% FS sensitivity 4 ... 20 mA or 0.5 ... 4.5 VDC ratiometric output options IP65, IP67 or IP69k protection class
Pressure transmitter with steel diaphragm; sesistant to high pressures up to 2500 bar, suitable for engines; superior sealing thanks to one-piece welding body; extra resistance to vibrations and temperature changes
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 2.5 to 0 ... 2500 bar | 4-20 mA, 0.5-4.5 VDC ratiometric | IP65, IP67, IP69K | ±%0.3 FS, ±%0.5 FS | |
-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight
BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar…0~0.002bar…100bar | 4-20mA, 4-20mA+HART | IP 65 | ±0.3%FS | |
Suitable for temperatures up to 300°C Can work with pressures up to 400 bar G1/2 or G1/4 connections
Pressure transmitter cooling elements are products that cool the body of the pressure transmitters in high temperature applications and protect them from temperature. It can be used in different connections with different inlet / outlet dimensions.| Maximum Pressure | Mechanical Connection | Maximum Temperature | Body | Datasheet |
|---|---|---|---|---|
| 400 Bar | G1/4F-G1/2M, G1/4F-G1/4M, G1/2F-G1/2M, G1/2F-G1/4M | 300°C | 316L Stainless Steel | |