JFR Radar Seviye Kontrol Sensörü || FineTek
Temassız sıvı seviyesi ölçümü
70 metreye kadar ölçüm
5 dijit LCM gösterge
4-20 mA ve HART çıkışı
±3mm’ye kadar doğruluk
Alüminyum gövde
IP67 koruma sınıfı
Dayanıklı gövde; toz birikmelerini önleyen conta tasarımı
| Ölçüm Aralığı | Çıkış | Koruma | Doğruluk | Datasheet |
|---|---|---|---|---|
| 70 metreye kadar | 4-20 mA, HART | IP67 | ±3 mm’ye kadar |
- Temassız sıvı seviyesi ölçümü
- Son teknoloji FMCW (frekans modülasyonlu-sürekli dalga) teknolojisi, ±3mm’ye kadar iyi hassasiyet.
- 4-20 mA ve HART çıkışı
- 24VDC destekli, 4 telli; 2 telli mevcut
- 70m’ye kadar ölçüm aralığı
- 5 dijit LCM gösterge
- IP67 koruma sınıfı
- 304SS, 316SS ve PTFE kaplı parçalar
| Brand |
Finetek |
|---|---|
| Ortam |
Genel sıvı ve katı |
| Min. Dielektrik sabit (katı) |
1.5 |
| Min. Dielektrik sabit (sıvı) |
1.4 |
| Ölçüm Aralığı |
Sıvı: 70 metreye kadar, Katı: 50 metreye kadar |
| Doğruluk |
±3mm @mesafe≤30m |
| Dijital Haberleşme |
HART |
| Ortam Sıcaklığı |
-40~80°C |
| Çalışma Sıcaklığı |
-40~200°C |
| Maksimum Basınç |
40 Bar |
| Frekans |
K Band |
| Analog Çıkış |
4~20mA |
| Gövde Malzemesi |
Alüminyum |
| IP Koruma Sınıfı |
IP67 |
| Besleme Voltajı |
24Vdc±10 % |
| Display |
5 dijit LCM display |
- Pompa ve proses ekipmanının seviye kontrolü
- Tank, depo ve silolarda doğru seviye ölçümü
- Temassız seviye ölçümü
|
DATASHEET
|
|
|---|---|
Benzer Ürünler
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 seconds0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP65 protection class Pedal type options
MSS series rotary paddle switches are used for level control in silos and tanks where materials with solid particles are stored. Full and empty signals can be received by performing level control in many demanding applications with different pedal varieties in a safe manner. They can be connected horizontally and vertically.| Torque | Connection Type | Output | Protection | Datasheet |
|---|---|---|---|---|
| 0.5~1.0KG-cm | 1-1/2” PT | SPDT Switch | IP65 |
1 RPM dönme hızı 0.3 g/cm3 malzeme yoğunluğu Switch çıkışı 220VAC veya 24VDC besleme IP65 koruma sınıfı T veya orak pedallı modeller
Ekonomik çözüm; toz birikmelerini önleyen conta tasarımı; dış mekanlardaki uygulamalar için de uygun.| Çalışma Sıcaklığı | Çıkış | Koruma | Datasheet |
|---|---|---|---|
| -20ºC ... +80ºC | Switch | IP65 |
Shaft with length of 15, 30, 50 cm Aluminium housing Switch output 220VAC or 24VDC supply IP65 protection class Exproof, Atex marking
Atex certified, suitable for use in explosive environments, ex-proof propeller level control sensor for powder or granules| Operating Temperature | Body | Output | Protection | Datasheet |
|---|---|---|---|---|
| -10ºC ... +60ºC | Aluminium | Switch | IP65 |
Non-contact liquid and solid level measurement High frequency 80GHz, more focus Accuracy ±2 mm(liquid), ±5 mm(solid) Measuring range up to 30m Small emitting angle ±3.5° 4-20 mA+HART+RS485 output G2 connection Exproof IP67 protection
Ideal for for continuous level measurement in liquid, simple solid and open water applications. Exproof and suitable for use in explosive environments.| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Up to 30 meters (liquid and solid) | 4-20 mA+HART+RS485 | IP67 | ±2 mm (liquid) ±5 mm (solid) |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit output| Supply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
|---|---|---|---|---|---|
| 10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C |



































