EPA 300 Process Control Device || ATEK || Made in Türkiye
Back to products
987K Switching Light Grid || ATEK

EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON

Click to enlarge
Atek

5 digit, 7 section high-contrast LCD display
DIN 43650 4 pin polarized Plug in/out connector
Compatible with transmitters with 4-20 mA output
4-20 mA 2-wire line supply
Accuracy: 0.1% +/- 1 digit
IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.


Datasheet
TR
EN
Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ～99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55
  • 24-bit high accuracy ADC sampling, lightning protection (4KV)
  • Backlight big screen, 350° rotation angle
  • 5 digit, 7 section high contrast LCD display:-19999 to 99999
  • Suitable for 4-20 mA transmitters
  • 2 alarm / switch outputs that can be adjusted according to max and min set values
  • 4-20 mA output option
  • Accuracy: 0.1% F.S. +/- 1 digit
  • More than 30 measurement units option abjustuble from menu
  • Plug in/out-DIN 43650 4 pin polarised
  • Error message for high / low range
  • IP55 protection class
  • Easy configuration with 3 buttons
  • 4-20 mA 2-wire loop power
  • Reverse polarity and lightning protection (4KV)
  • Voltage drop max. 8 V
  • Display of differential pressure in differential pressure transmitters
Brand

Atek
Applications

4-20 mA current value or percentage site display
Up to 2 indipendent switch output
Input signal

4-20 mA (2-wire)
Output Signals

1 way switch output / 2 way switch output / 1 way switch + 4…20mA output
Power supply

4-20 mA 2-wire loop power supply, max pressure drop 8VDC
Site operation

3 buttons, all parameters can ve modified at site
Display

Double row 5bit/8bit, 7 section/16 section with backlight LCD display
-19999～ 99999
Accuracy

% 0.1 F.S ±1 bit
ADC sampling

24 bit
Switch state

Normally open, normally closed for option
Switch function

High setting, low setting, window function, hysteresis function
State indicate

Red or Green LED display
Material

ABS+PC
Rotation Angle

350°
Anti-Vibration

20g, 20-5000Hz
Anti-Shock

100g, 11 ms
Electrical protection

Short Circuit protection, reverse polarity protection

It is used to receive 4-20mA signal from the transmitters and convert to the desired measurement unit and display it.

DATASHEET
PDF
PDF
User Manual
PDF
PDF

Benzer Ürünler
ECT 8472 Pressure Transmitter || TRAFAG || Swiss Made
,

Ceramic diaphragm Stainless steel body Options from 0 ... 1 bar to 0 ... 400 bar ±0.5% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class Economical and convenient solution Datashee

Pressure transmitter with ceramic diaphragm; economical and durable solution; relative or absolute measurement option


Datasheet
Measuring Range Output Protection Accuracy Datasheet
0 ... 1 to 0 ... 400 bar 4-20 mA, 0-10 VDC, 0.5-4.5 VDC ratiometric, 0-5 VDC, 1-6 VDC
IP65, IP67, IP68
 ±%0.5 FS
Quick view
BLT 22 Pressure Transmitter || ATEK || Made in Türkiye
,

Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction

Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
Datasheet
TR
EN
Measuring Range Output Protection Accuracy Body Diameter Datasheet
0…10bar and 0…16bar  4-20 mA IP65  ±%0,5 F.S 24mm
Quick view
EPT 22 Pressure Transmitter || ATEK || Made in Türkiye
,

Piezoresistive measuring principle Stainless steel housing (303) 10 Bar, 16 Bar, 0… -1 Bar, -1… 0 Bar Different options 4-20mA, 0-10 VDC or ratiometric output options ±1% F.S sensitivity IP65 protection class Compact construction

For air or non-corrosive gas applications


Datasheet
TR
EN
Measuring Range Output Protection Accuracy Datasheet
10 Bar, 16 Bar , 0…-1 Bar, -1…0 Bar 4-20 mA, 0-10 VDC, Ratiometric IP65  ±%1 F.S
Quick view
FPT 8236 Flush Membrane Pressure Transmitter || TRAFAG || Swiss Made
,

Thin film steel diaphragm, flush membrane Stainless steel body Options from -0.5 ... 0.5 bar to 0 ... 100 bar ±0.5% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class

Pressure transmitter with steel diaphragm and flush membrane; one-piece welded sealing body for high durability and resistance to ambient conditions; very small compact design; special smooth and flat flush membrane


Datasheet
Measuring Range Output Protection Accuracy Datasheet
-0.5 ... 0.5 to 0 ... 100 bar 4-20 mA, 0-10 VDC, 0-5 VDC, 1-6 VDC, 0.5-4.5 VDC ratiometric
IP65, IP67, IP68
 ±%0.5 FS
Quick view
CMP 8270 Pressure Transmitteri || TRAFAG || Swiss Made
,

Thin film steel diaphragm Stainless steel body Options from 0 ... 0.2 bar to 0 ... 600 bar ±0.5% FS, ± 0.15% FS, ± 0.1% FS accuracy options CANopen output IP67 protection class

Pressure transmitter with steel diaphragm and temperature measurement in one device; CANopen output; small and durable design; very high accuracy value options


Datasheet
Measuring Range Output Protection Accuracy Datasheet
0 ... 0.2 to 0 ... 600 bar CANopen
 IP67
 ±0.5% FS, ±0.15% FS,±0.1% FS 
Quick view
BHT 26 Flush Pressure Transmitter for Sanitary Applications || ATEK ||
,

100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection

BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.
Datasheet
TR
EN
 Pressure Range Output Protection Accuracy Datasheet
0...100 mBar to 0...100 Bar 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric IP 65 ±0.5%FS
Quick view