Showing all 4 results

Different analog input functions
RS-232, RS-485, USB or CANopen communication options
Analog output options
2 adjustable relay outputs
24 VAC/DC or 85-265 VAC supply options
2 lines 5 digit display

Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate

Display Input Options Supply Voltage Datasheet
Dual line 5 digits
Potentiometric, 0-10 V, 0-5 V, 0.5-4.5 V, 4-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, CANopen
24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz

Process and temperature measurement at the same time
RS-232, RS-485, USB or CANopen communication options
Analog output options
2 relay outputs (optional 3), adjustable for different functions
24 VAC/DC or 85-265 VAC supply options
Two lines 5 digits display

Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate

Display Input Options Supply Voltage Datasheet
Dual line, 5 digits Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V Ratiometric, Thermocouple, RTD, CANopen 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz

4 different analog input functions in one device
2 relay outputs (optional 4), adjustable in different functions
RS-232, RS-485 or CANopen communucation options
Analog output options
24 VAC/DC or 85-265 VAC supply options
Single line, 5 digits display

Universal process control device; adjustable relay outputs, RS-232, RS-485 or CANopen option; 3.5 kHz high sampling rate

Display Input Options Supply Voltage Datasheet
Single line, 5 digits
Potentiometric, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20mA, 3,33 mV/V, 2 mV/V, 2.5 mV/V, CANopen 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz

5 digit, 7 section high-contrast LCD display
DIN 43650 4 pin polarized Plug in/out connector
Compatible with transmitters with 4-20 mA output
4-20 mA 2-wire line supply
Accuracy: 0.1% +/- 1 digit
IP55 protection class

The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.

Display Range Input Signal Output Signal Accuracy Protection Class Datasheet
-19999 ~99999 4-20 mA 2 way switch, 1 way switch + 4-20 mA 0.1%F.S ±1 bit IP55