ALC 94 Process Control Device || ATEK || Made in Türkiye
Back to products
EPA 200 Process Control Device || ATEK || Made in Türkiye

EPA 100 Process Control Device || ATEK || Made in Türkiye

Click to enlarge
Atek

Different analog input functions
RS-232, RS-485, USB or CANopen communication options
Analog output options
2 adjustable relay outputs
24 VAC/DC or 85-265 VAC supply options
2 lines 5 digit display

Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate


Datasheet
TR
EN
Display Input Options Supply Voltage Datasheet
Dual line 5 digits
Potentiometric, 0-10 V, 0-5 V, 0.5-4.5 V, 4-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, CANopen
 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz
  • 4 different analogue input on one device
  • Two lines display;
  • The first line shows the analog process value from the sensor and the second line shows the unit or relay set point for the measured value
  • Load Cell can also be connected
  • RS-232, RS-485, USB or CANopen communication
  • 2 relay outputs which can be set in different functions
  • Analog output options (0-10V, 0-5V, 0.5-4.5V, 4-20mA, 0-20mA)
  • Invertible analog output (eg, 0 V, 20-0 mA)
  • High refresh rate: 3.5 kHz
  • Converting analogue signals (4-20 mA, 0-20 mA, 0-10 V, potentiometric, ratiometric) to CANopen signals,
  • and CANopen signals to analogue.
  • Fast and easy parameter configuration via USB
  • Compact design
  • User friendly and easy interface 
  • Tare function (scaling to zero)
  • Password protection and Hide function for menu
Brand

Atek
Supply Voltage

24 VAC/DC 50/60 Hz
85-265 VAC 50/60 Hz
Power Consumption

9 VA / 2,7 Watt Maximum
Sensor Supply Voltage

Pot: 10 VDC
mV/V: 10 VDC
0-10V: 24 VDC
0-5V: 5 VDC
0,5-4,5V: 5 VDC
4-20 mA: 24 VDC
CANopen: 24 VDC
Maximum Sensor Supply Current

100 mA
Refresh Rate

3.5 kHz
Resolution

16 bit
Analog Inputs

Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V Ratiometric
Relay Outputs

2 Adet 250 VAC 3A (Resistive Load) Relay
Serial Communication (Optional)

RS-232, RS-485, USB, CANopen
Analog Outputs (Optional)

0-10 V, 0-5 V, 0.5- 4.5 V, 4-20 mA, 0-20 mA
Connection

2,5 mm ² connector terminal
Operating Temperature

0 ile 50 °C
Protection Class

IP60 Front Panel, IP20 Back Panel
  • Instantaneous display of output of any measuring device with Potentiometric, Voltage, Current or CANopen output
  • Where your automation solutions require sensor output relay output
  • Every field of industrial measurement
DATASHEET
PDF
PDF
User Manual
PDF
PDF
MODBUS PROTOCOL ADRESS TABLE
PDF
PDF
CANOPEN ADRESS TABLE
PDF
PDF
MY PANELMETER PROGRAM QUICK GUIDE
PDF
PDF
EPA QUICK USER GUIDE
PDF
PDF
MY PANELMETER PROGRAMMER
ZIP
CAD / STEP
ZIP

Benzer Ürünler
ALC 94 Process Control Device || ATEK || Made in Türkiye
,

Counting Up-Down in Quadrature mode Selectable multiplier value (0.00001 to 999999) High frequency, 600 kHz reading rate 2 adjustable relay outputs (optional 4) 24 VAC / DC or 85-265 VAC supply option Single line, 6 digit display

Multifunctional digital pulse counter for encoders; programmable and easy to understand menu; high frequency reading rate; relay output


Datasheet
TR
EN
Dipslay Input Options Supply Voltage Datasheet
Single line, 6 digits A/B Encoder pulse, Z (zero), Hold 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz
Quick view
EPA 200 Process Control Device || ATEK || Made in Türkiye
,

Process and temperature measurement at the same time RS-232, RS-485, USB or CANopen communication options Analog output options 2 relay outputs (optional 3), adjustable for different functions 24 VAC/DC or 85-265 VAC supply options Two lines 5 digits display

Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate
Datasheet
TR
EN
Display Input Options Supply Voltage Datasheet
Dual line, 5 digits Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, 50mV, Ratiometric, Thermocouple, RTD, CANopen 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz
Quick view
OP 5 Series || FIAMA || Italian Quality
,

20 mm hollow shaft with H7 tolerance Pitch options ranging from 0.5 mm to 12 mm 600 rpm maximum speed 5 digit display IP54 protection class

Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.1 to 15 mm; shaft less than 20 mm with extra flange


Datasheet
Indicator Number of Digits Hollow Shaft Diameter Protection Measure After 1 Rev. Maximum Speed Datasheet
5 digit (max. 99999) 20 mm ( H7 tolerance) IP 54 Options from 1 to 150 mm 600 RPM
Quick view
OP 6 Series || FIAMA || Italian Quality
,

20 or 25 mm hollow shaft with H7 tolerance Pitch options ranging from 0.75 mm to 20 mm Maximum speed of 500 rpm 5 digit display IP64 protection class ı

Precise and economical, full hollow shaft mechanical counter for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; 4 digit + 1 vernier scale display option


Datasheet
Indicator Number of Digits Hollow Shaft Diameter Protection Measure After 1 Rev. Maximum Speed Datasheet
5 digit (max. 99999) 20 or 25 mm ( H7 tolerance) IP 64 Options from 7 to 200 mm 500 RPM
Quick view
OP 7 Series || FIAMA || Italian Quality
,

20 or 25 mm with H7 tolerance Pitch options ranging from 0.75 mm to 20 mm 800 rpm maximum speed 5 digit display IP64 protection class

Precise and economical, counter with hollow shaft for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; shaft less than 20 mm with extra flange


Datasheet
Indicator Number of Digits Hollow Shaft Diameter Protection Measure After 1 Rev. Maximum Speed Datasheet
5 digit (max. 99999) 20 or 25 mm (H7 tolerance) IP 64 Options from 7 to 200 mm 800 RPM
Quick view
EP 7 Series Electronic Indicator || FIAMA || Italian Qualitiy
,

Electronic display counter for measuring movement and angles 6 digit LCD display, programming with 3 different keys Integrated battery with a lifetime of at least 4 years 400 rpm maximum speed IP54 protection class (Optional IP65)

Electronic gauge with precision and full hollow shaft for measuring movement and angles; body made of impact-resistant special plastic and stainless steel; easily replaceable 4 year integrated battery


Datasheet
Indicator Number of Digits Hollow Shaft Diameter Protection Measure After 1 Rev. Maximum Speed Datasheet
6 digit LCD 14 or 2 mm IP 54
The desired value from -99999 to +99999
 400 RPM
Quick view