Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
EPD 20 Intelligent Pressure Transmitter With LCD Display, Aluminum Alloy Case || ATEK ||
100 milibar….200 BAR pressure range
Easy configuration with LCD module buttons
24VDC supply voltage
4…20mA/HART or MODBUS RTU output
Many measurement unit options adjustable from the menu
High accuracy up to ±%0,3 FS
IP65 protection class
EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….200 BAR | 4…20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 |  |
- 100 milibar….200 BAR pressure range
- Easy configuration with LCD module buttons
- 24VDC supply voltage
- 4…20mA/HART or MODBUS RTU output
- HART output model: LCD with backlight, displaying 5 bits, and 4 decimal places
- MODBUS output model: LCD with backlight, displaying 6 bits, and 5 decimal places
- Many measurement unit options adjustable from the menu
- High accuracy up to ±%0,3 FS
- Short circuit and reverse polarity protection
- Aluminum alloy case
- Excellent long-term work
- IP65 protection class
| Brand |
Atek |
|---|---|
| GENERAL FEATURES |
–> |
| Pressure Range |
Diffrent models from 0…100mbar to 0…200Bar |
| Output signal |
4…20mA/HART or MODBUS RTU |
| Supply voltage |
HART output model: 12-32VDC (suggested 24VDC) |
| Site operation |
3 buttons, all parameters can ve modified at site |
| MECHANICAL AND ENVIRONMENTAL FEATURES |
–> |
| Working and storage temperature |
-30°C … +70°C |
| Protection class |
IP65 |
| Material |
Transmitter : Stainless steel hosuing – 1.4305 (AISI303), Optional stainless 316L or Titanium |
| TRANSMITTER FEATURES |
–> |
| Measurement Range |
Diffrent models from 0…100mbar to 0…600Bar |
| Measurement Type |
Ambient pressure measurement as relative |
| Working Principle |
Piezoresistive |
| Maximum Compressive Strength |
300%F.S. ≤700mbar, 200%F.S. ＜250Bar |
| Oring – Sealing |
Standard NBR, optional FKM(Viton) or EPDM |
| Process Connection |
G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14, UNF7/16X20M, UNF7/16X20F |
| Accuracy |
±%0,5 or ±%0,3 F.S @25ᵒ C |
| Long Term Stability |
± % 0,3 T.S/ years |
| Response Time |
1ms … nominal pressure |
| Mounting / Tightening Torque |
15 … 20 Nm |
| LCD DISPLAY FEATURES |
–> |
| Display |
Modbus Output Model: LCD with backlight, displaying 6 bits, and 5 decimal places |
| Units |
Modbus Output Model: KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,% |
| Sampling rate |
>20 kez/s |
| Display interface |
Enlish and Chinese; pressure, temperature, current, percentage |
| Linearity |
Better than %0,2 |
| Stability |
% 0.2/year |
| Circuit protection |
Surge current protection, reverse power protection |
| Isolation range |
>200MΩ |
| Motherboard buttons operation |
reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration) |
| LCD buttons operation |
changing machine address (0-255), units, decimal place, damping time and zero clearing |
- Pneumatic Systems
- Air compressors
- Air Cooling-Heating Systems
- Water Pumps
- Liquid tanks
- Medical industry
- Chemical industry
Benzer Ürünler
Piezoresistive measuring principle Stainless steel housing (303) 10 Bar, 16 Bar, 0… -1 Bar, -1… 0 Bar Different options 4-20mA, 0-10 VDC or ratiometric output options ±1% F.S sensitivity IP65 protection class Compact construction
For air or non-corrosive gas applications
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 10 Bar, 16 Bar , 0…-1 Bar, -1…0 Bar | 4-20 mA, 0-10 VDC, Ratiometric | IP65 | ±%1 F.S | |
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 2000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 2000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm | |
Thin film steel diaphragm Stainless steel body Options from 0 ... 0.2 bar to 0 ... 600 bar ±0.5% FS, ± 0.15% FS, ± 0.1% FS accuracy options CANopen output IP67 protection class
Pressure transmitter with steel diaphragm and temperature measurement in one device; CANopen output; small and durable design; very high accuracy value options
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.2 to 0 ... 600 bar | CANopen | IP67 | ±0.5% FS, ±0.15% FS,±0.1% FS | |
100mbar…100bar pressure range Suitable for sanitary applications Suitable for 1.5" tri-clamp connection ±0.5%FS accuracy 4-20 mA, 0-10V etc. analog output options IP65 protection
BT10-211 flush pressure transmitter is applicable to food, beverage, pharmaceutical and biological engineering. Full metal flush-mounting isolation diaphragm is directly welded with process connection to ensure the precision connection between process connection and measuring diaphragm. Therefore, no additional sealing gaskets are required, and it ensures there are no measurement dead zones.| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0...100 mBar to 0...100 Bar | 4-20mA, 0-20mA, 0-10V, 1-6V, 0-5V, Ratiometric | IP 65 | ±0.5%FS | |
-1bar…0~0.002bar…100bar pressure range Flange mounting ±0.3%FS accuracy Double-wire mode, 4～20mA analog output, HART® protocol IP65 protection class Intelligent LCD gauge outfit with backlight
BT10-212 Flush Pressure Transmitter with Flange is a type of flush product in order to meet the flange mounting requirement of the customer. This series are widely applied for the viscous media with particles in the fields such as industrial process control, petroleum, chemical industry, metallurgy etc.
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar…0~0.002bar…100bar | 4-20mA, 4-20mA+HART | IP 65 | ±0.3%FS | |
Piezoresistive silicone differential pressure sensor Stainless steel housing (304) Different models from 100 mBar to 25 Bar 4-20mA, 0-5 VDC or 1-5 VDC analog output options ±0.5% F.S accuracy IP65 protection class Compact construction
MEMS based piezoresistive silicon sensor; stainless steel body; long term stability and high precision; EMC and reverse polarity protection
| Differential Pressure Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| Different options from 100 mBar to 25 Bar | 4-20 mA, 0-5 VDC, 1-5VDC | IP65 | ±%0,5 F.S | |