Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and ConnectorsShop
Process and temperature measurement at the same time
RS-232, RS-485, USB or CANopen communication options
Analog output options
2 relay outputs (optional 3), adjustable for different functions
24 VAC/DC or 85-265 VAC supply options
Two lines 5 digits display
Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate
| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
| Dual line, 5 digits | Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, 50mV, Ratiometric, Thermocouple, RTD, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz |  |
4 different analog input functions in one device
2 relay outputs (optional 4), adjustable in different functions
RS-232, RS-485 or CANopen communucation options
Analog output options
24 VAC/DC or 85-265 VAC supply options
Single line, 5 digits display
Universal process control device; adjustable relay outputs, RS-232, RS-485 or CANopen option; 3.5 kHz high sampling rate
| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
|
Single line, 5 digits
|
Potentiometric, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20mA, 3,33 mV/V, 2 mV/V, 2.5 mV/V, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
5 digit, 7 section high-contrast LCD display
DIN 43650 4 pin polarized Plug in/out connector
Compatible with transmitters with 4-20 mA output
4-20 mA 2-wire line supply
Accuracy: 0.1% +/- 1 digit
IP55 protection class
The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.
| Display Range | Input Signal | Output Signal | Accuracy | Protection Class | Datasheet |
|---|---|---|---|---|---|
| -19999 ～99999 | 4-20 mA | 2 way switch, 1 way switch + 4-20 mA | 0.1%F.S ±1 bit | IP55 | |
8, 10 veya 12 mm delik çapı
0,5 mm – 10 mm arasında değişen hatve seçenekleri
1000 devir/dk maksimum hız
3 dijit gösterge
IP64 koruma sınıfı
Hareket ve açıların ölçümü için, hassas ve ekonomik, tam delik(hollow) şaftlı mekanik sayaç; darbelere dayanıklı özel teknopolimerden ve paslanmaz çelikten yapılmış gövde; 0.5–10 mm arası hatve seçenekleri
| Gösterge Hane Sayısı | Tam Delik (Hallow) Şaft Çapı | Koruma | Bir tam turda artan gösterge değeri | Maksimum Hız | Datasheet |
|---|---|---|---|---|---|
| 3 dijit (maks. 999) | 8, 10 veya 12 mm | IP 64 | 5’ten 100’e kadar seçenekler | 1000 devir/dakika | |
Hollow shaft with 14 mm H7 insert tolerance
Pitch options ranging from 0.5 mm to 12 mm
Maximum speed of 600 RPM
4 digit display
Working without electricity
IP64 protection class
Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.5 to 12 mm; shaft less than 14 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 4 digit (max. 9999) | 14 mm ( H7 tolerance) | IP 64 | Options from 5 to 120 mm | 600 RPM | |
20 mm hollow shaft with H7 tolerance
Pitch options ranging from 0.5 mm to 12 mm
600 rpm maximum speed
5 digit display
IP54 protection class
Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.1 to 15 mm; shaft less than 20 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 mm ( H7 tolerance) | IP 54 | Options from 1 to 150 mm | 600 RPM | |
20 or 25 mm hollow shaft with H7 tolerance
Pitch options ranging from 0.75 mm to 20 mm
Maximum speed of 500 rpm
5 digit display
IP64 protection class
ı
Precise and economical, full hollow shaft mechanical counter for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; 4 digit + 1 vernier scale display option
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 or 25 mm ( H7 tolerance) | IP 64 | Options from 7 to 200 mm | 500 RPM | |
20 or 25 mm with H7 tolerance
Pitch options ranging from 0.75 mm to 20 mm
800 rpm maximum speed
5 digit display
IP64 protection class
Precise and economical, counter with hollow shaft for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; shaft less than 20 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 or 25 mm (H7 tolerance) | IP 64 | Options from 7 to 200 mm | 800 RPM | |
0, 30 or 25 mm hollow shaft
Pitch options ranging from 1 mm to 12 mm
Maximum speed of 300 rpm
5 digit display
IP64 protection class
Precise and economical, mechanical counter with ollow shaft for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 1-12 mm; 4 digit + 1 vernier scale display option
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20, 30 or 35 mm ( H7 tolerance) | IP 64 | Options from 10 to 120 mm | 300 RPM | |
Measures the angular, displacement, velocity values of circular movements on handwheels
Robust housing in special technopolymer or metal construction
IP64 protected
Durable up to 80°C
Position indicator used to measure the values of angle, displacement, velocity of circular movements on handwheels; robust housing in special technopolymer or metal construction; Easy reading with 2 separate indicator bars or 1 indicator 1 meter option; different number of turns with different reduction ratio options
| Display | Protection | Maximum Temperature | Datasheet |
|---|---|---|---|
| 2 pieces (One bar shows the angle and the integrated 4-digit display shows the number of turns) | IP 64 | 80 °C | |
Measures the angular, displacement, velocity values of circular movements on handwheels
Robust housing with special technopolymer structure
IP65 protected
Durable up to 80 °C
Position indicator used to measure the values of angle, displacement, velocity of circular movements on handwheels; rugged housing with special technopolymer structure; Easy reading with 2 separate indicator sticks; different number of turns with different reduction ratio options
| Display | Protection | Maximum Temperature | Datasheet |
|---|---|---|---|
| 2 indicators | IP 65 | 80 °C | |
Position indicator with electronic indicator for handwheels
5-digit LCD display, programming with 3 different keys
Integrated battery with 4 years lifetime
Maximum speed of 400 rpm
IP54 protection class
Position indicator with electronic indicator for handwheels; easily replaceable integrated battery with a minimum life of 4 years; Adjustable functions thanks to the buttons on it
| Indicator Number of Digits | Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit LCD | 85 mm | IP 54 | The desired value from -99999 to +99999 | 400 RPM | |