SEM 150 Level Switch with Propeller || Fiama ||
- Accurate protection against dust from tank
- Die-cast aluminium case: waterproof for working also in open air
- Stainless steel shaft mounted on ball bearings
- Propeller in aluminium or on request in stainless steel
- Mounting with a 6-bore flange or on request with a threaded hub of 1”1/2 inch GAS
- Standard lengths of the shaft (with propeller holder) are cm 15, 30, 50, 70, 100: it is the part that works inside the tank
Brand |
Fiama |
---|---|
Case |
Aluminum |
Protection Class |
IP65 |
Electrical Contacts |
6A 250Vac, 3A 250Vdc |
Operating Temperature |
-10°…+60° C/td> |
Power Supply |
24 115 230 Vac ±10% 50/60 Hz 24 Vdc ±10 % |
Absorbtion |
3 VA |
Shaft Length |
15, 30, 50, 70, 100 cm |
Electromagnetic Compatibility |
2014/30/UE |
The level controls with propeller SEM are used for the control of level in tanks that contain powders or granular material
DATASHEET
|
|
---|---|
Benzer Ürünler
Suitable for mineral oils Alarm delay time between 0-40 seconds can be selected at the ordering stage 40 Bar pressure resistance Sink (NPN) or source (PNP) output type High accuracy and stability IP67 protection class
Suitable for level measurement in mineral oils, sink (NPN) or source (PNP) output, selectable alarm delay time between 0-40 secondsSpecial design for textile sector Piezoresistive working principle 316L stainless steel housing Different models between 100 mBar and 600 mBar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 protection class Compact construction
Special design for textile sector; stainless steel body; air isolated mounting; high sensitivity; EMC and reverse polarization protected; small and compact design
Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
---|---|---|---|---|---|
Different models from 0...100mbar to 0...600mbar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 | ±%0,3 F.S | 23mm | ![]() |
Suitable for temperatures up to +200ºC 1 RPM rotation speed Material density of 0.3 g/cm3 Switch output 24VDC supply IP65 protection class
Economic solution; gasket design prevents dust accumulation; also suitable for high temperature applicationsOperating Temperature | Output | Protection | Datasheet |
---|---|---|---|
-40ºC ... +200ºC | Switch | IP65 | ![]() |
Ultrasonic working principle 0.5 - 9 meters measuring distance 4-20mA, 0-10V, 0-20 mA analog output options available CANopen, RS485, RS232 serial communication options IP65 or IP67 protection class Robust housing
Non-contact, level and volume measurement of liquid and solid materials in open and closed tanks, measuring range can be calibrated from the menuMeasuring Range | Output | Taper Angle | Accuracy | Protection | Datasheet |
---|---|---|---|---|---|
0.5 - 9 meters | 4-20 mA, 0-20 mA, 0-10V, CANopen, RS-232, RS-485, 2xPNP Open Collector | 30° | %0,2 FS | IP65 or IP67 | ![]() |
10-28VDC supply voltage NPN, PNP open collector output to energize relay or PLC Housing material of PC, PES, SUS304, SUS316 for applicable in water, oil, liquid solution, liquor, alcohol, organic solvent...etc. Over-current and reverse polarity protected LED status indicator IP67 protection class
The optical liquid level switch uses the principle of total reflection in a prism. When the sensor is surrounded by air, the angle of incidence is greater than the critical angle and thus total reflection occurs. Totally reflected light will be transmitted to the receiver. Conversely, when the sensor is surrounded by liquid, due to the refractive index of the liquid and the sensor tip material, almost all light will penetrate the front of the sensor. The receiver can detect and determine a light reflected or penetrated state, and determines the circuit outputSupply Voltage | Output | Connection | Protection | Operating Temp. | Datasheet |
---|---|---|---|---|---|
10~28 Vdc | NPN or PNP Open Collector | PT, PF, NPT | IP67 | -10...+125°C | ![]() |