Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
EP20/EP25 Series Electronic Indicator || FIAMA || Italian Qualitiy
Counter with electronic display for measuring motion and angles
6-digit LCD display, programming with 3 different keys
Integrated battery with a lifetime of at least 4 years
1000 RPM maximum speed
IP54 protection class
Electronic gauge counter with hollow shaft from side for precise and lateral measurement of movement and angles; body made of impact-resistant special plastic and stainless steel; easy-to-replace integrated battery lasting at least 4 years
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 6 digit LCD | 20 or 25 mm (H7 tolerance) | IP 54 | The desired value from -99999 to +99999 | 1000 RPM |  |
- Electronic gauge counter with side hollow shaft for precise and lateral measurement of movement and angles
- Suitable for industrial use since it works with integrated battery
- Robust battery with a minimum lifetime of 4 years
- 6-digit LCD display, programming with 3 different keys
- Special plastic and stainless steel housing with extra impact resistance
- Side hollow shaft with 20 or 25 mm side
- Functions that can be programmed using the keys:
– The desired increment value to be displayed in one full turn
– Direction of measurement
– 3 different reference points reset and selection
– Absolute or relative reference point option
– Angular representation
- Maximum speed 1000 rpm
- Resistant to 50 °C
- Easy reading in any case thanks to the different display location and 10 mm display depending on the location where the meter will be used
- Black or orange color options
| Brand |
Fiama |
|---|---|
| Ağırlık |
320 gr |
| Hassasiyet |
4000 pulse/devir |
| Programlanabilir Özellikler |
Bir tam turda gösterilecek değer, referans noktası reset/preset, absolute/incremental ölçüm, açısal gösterim, 3 farklı başlangıç noktası |
| Batarya Ömrü |
4 yıl sürekli kullanım |
| Gösterge Ekranı |
LCD; 10 mm yükseklik |
| Elektromanyetik Uyumluluk |
2014/30/UE |
| Tuş Takımı |
3 farklı tuş |
| Maksimum Hız |
1000 devir/dk |
| Besleme Voltajı |
Entegre Lityum batarya: 2 adet AA 1,5V |
| Koruma |
IP 54 |
| Gösterge Aralığı |
-999999 … +999999 |
| Çalışma Ortam Nemi |
% 35 – % 85 |
| Çalışma Sıcaklığı |
0 °C … 50 °C |
- Machinery Industry
- Woodworking Machines
- Metal Processing Machinery
- Textile Machinery
- Glass and marble machines
|
DATASHEET
|
|
|---|---|
Benzer Ürünler
Process and temperature measurement at the same time RS-232, RS-485, USB or CANopen communication options Analog output options 2 relay outputs (optional 3), adjustable for different functions 24 VAC/DC or 85-265 VAC supply options Two lines 5 digits display
Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
| Dual line, 5 digits | Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, 50mV, Ratiometric, Thermocouple, RTD, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
4 different analog input functions in one device 2 relay outputs (optional 4), adjustable in different functions RS-232, RS-485 or CANopen communucation options Analog output options 24 VAC/DC or 85-265 VAC supply options Single line, 5 digits display
Universal process control device; adjustable relay outputs, RS-232, RS-485 or CANopen option; 3.5 kHz high sampling rate| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
|
Single line, 5 digits |
Potentiometric, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20mA, 3,33 mV/V, 2 mV/V, 2.5 mV/V, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
Hollow shaft with 14 mm H7 insert tolerance Pitch options ranging from 0.5 mm to 12 mm Maximum speed of 600 RPM 4 digit display Working without electricity IP64 protection class
Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.5 to 12 mm; shaft less than 14 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 4 digit (max. 9999) | 14 mm ( H7 tolerance) | IP 64 | Options from 5 to 120 mm | 600 RPM | |
20 mm hollow shaft with H7 tolerance Pitch options ranging from 0.5 mm to 12 mm 600 rpm maximum speed 5 digit display IP54 protection class
Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.1 to 15 mm; shaft less than 20 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 mm ( H7 tolerance) | IP 54 | Options from 1 to 150 mm | 600 RPM | |
20 or 25 mm hollow shaft with H7 tolerance Pitch options ranging from 0.75 mm to 20 mm Maximum speed of 500 rpm 5 digit display IP64 protection class ı
Precise and economical, full hollow shaft mechanical counter for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; 4 digit + 1 vernier scale display option
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 or 25 mm ( H7 tolerance) | IP 64 | Options from 7 to 200 mm | 500 RPM | |
Measures the angular, displacement, velocity values of circular movements on handwheels Robust housing in special technopolymer or metal construction IP64 protected Durable up to 80°C
Position indicator used to measure the values of angle, displacement, velocity of circular movements on handwheels; robust housing in special technopolymer or metal construction; Easy reading with 2 separate indicator bars or 1 indicator 1 meter option; different number of turns with different reduction ratio options
| Display | Protection | Maximum Temperature | Datasheet |
|---|---|---|---|
| 2 pieces (One bar shows the angle and the integrated 4-digit display shows the number of turns) | IP 64 | 80 °C | |