Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Laser Distance Sensors
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earthquake Sensors
Mechanical Plunger Switches
Accelerometers
Faucet Sensors
Seam Detector Sensors
Encoder Signal Conditioner and Optical Isolator
Couplings
Cable and Connectors
OP 7 Series || FIAMA || Italian Quality
20 or 25 mm with H7 tolerance
Pitch options ranging from 0.75 mm to 20 mm
800 rpm maximum speed
5 digit display
IP64 protection class
Precise and economical, counter with hollow shaft for measuring motion and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options between 0.75-20 mm; shaft less than 20 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 or 25 mm (H7 tolerance) | IP 64 | Options from 7 to 200 mm | 800 RPM |  |
- Precise and economical mechanical counter with full hollow shaft for measuring movement and angles
- Very suitable for industrial use since it works without electricity
- Pitch (screw pitch) options ranging from 0.75 mm to 20 mm
- Body made of special technopolymer and stainless steel with extra impact resistance
- Full hollow shaft with 20 or 25 mm H7 insertion tolerance. Shaft smaller than 20 mm can also be obtained with an extra flange.
- When the shaft moves one full turn, the amount of increase in the value of the gauge changes depending on the line. For these values ​​ranging from 7 to 200, please refer to the technical specifications tab or the product catalog.
- Maximum speed 800 rpm. Please refer to the technical specifications tab or product catalog as it varies according to pitch options.
- Durable up to 80 °C
- Easy reading in any case thanks to different display location and angle options depending on the location where the meter will be used
- Orange, black, red and gray color options
- The OP 7 series is the top version of the OP 6 and can be easily replaced by the OP 6. The OP 7 gives more accurate and accurate results at high speeds.
| Brand |
Fiama |
|---|---|
| Pitch (mm) |
Measure after 1 rev. (mm) – Maximum speed (RPM) |
| 0,75 |
00007 (5) , 800 |
| 1 |
00010 , 800 |
| 1,25 |
00012 (5) , 800 |
| 1,75 |
00017 (5) , 600 |
| 2 |
00020 , 600 |
| 2,5 |
00025 , 500 |
| 3 |
00030 , 400 |
| 3,5 |
00035 , 300 |
| 4 |
00040 , 300 |
| 5 |
00050 , 250 |
| 6 |
00060 , 250 |
| 7,5 |
00075 , 150 |
| 8 |
00080 , 150 |
| 10 |
00100 , 100 |
| 12 |
00120 , 100 |
| 15 |
00150 , 100 |
| 20 |
00200 , 80 |
- Machinery Industry
- Woodworking Machines
- Metal Processing Machinery
- Textile Machinery
- Glass and marble machines
|
DATASHEET
|
|
|---|---|
Benzer Ürünler
3 different input options in one device Tachometer and Batch models High frequency, 600 kHz reading rate 2 adjustable relay outputs 24 VAC/DC veya 85-265 VAC supply options 2 lines, 7 digits display
Multifunctional digital pulse counter for encoders; programmable and easy to understand menu; high frequency reading rate; relay output; ALC77T (Tachometer) and ALC77B (Batch) sub-models
| Display | Input Options | Sensor Supply Voltage | Datasheet |
|---|---|---|---|
| 2 lines, 7 digits | A/B Encoder pulse, Z (zero), Hold | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
Different analog input functions RS-232, RS-485, USB or CANopen communication options Analog output options 2 adjustable relay outputs 24 VAC/DC or 85-265 VAC supply options 2 lines 5 digit display
Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate
| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
| Dual line 5 digits | Potentiometric, 0-10 V, 0-5 V, 0.5-4.5 V, 4-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
Process and temperature measurement at the same time RS-232, RS-485, USB or CANopen communication options Analog output options 2 relay outputs (optional 3), adjustable for different functions 24 VAC/DC or 85-265 VAC supply options Two lines 5 digits display
Universal process control device; RS-232, RS-485, USB or CANopen option; 3.5 kHz high sampling rate| Display | Input Options | Supply Voltage | Datasheet |
|---|---|---|---|
| Dual line, 5 digits | Potentiometer, 0.5-4.5 V, 0-5 V, 0-10 V, 4-20 mA, 0-20 mA, 3.33 mV/V, 2mV/V, 2.5mV/V, 50mV, Ratiometric, Thermocouple, RTD, CANopen | 24 VAC/DC 50/60 Hz 85-265 VAC 50/60 Hz | |
20 mm hollow shaft with H7 tolerance Pitch options ranging from 0.5 mm to 12 mm 600 rpm maximum speed 5 digit display IP54 protection class
Precise and economical mechanical counter with hollow shaft for measuring movement and angles; body made of impact resistant special technopolymer and stainless steel; Pitch options from 0.1 to 15 mm; shaft less than 20 mm with extra flange
| Indicator Number of Digits | Hollow Shaft Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit (max. 99999) | 20 mm ( H7 tolerance) | IP 54 | Options from 1 to 150 mm | 600 RPM | |
Measures the angular, displacement, velocity values of circular movements on handwheels Robust housing with special technopolymer structure IP65 protected Durable up to 80 °C
Position indicator used to measure the values of angle, displacement, velocity of circular movements on handwheels; rugged housing with special technopolymer structure; Easy reading with 2 separate indicator sticks; different number of turns with different reduction ratio options
| Display | Protection | Maximum Temperature | Datasheet |
|---|---|---|---|
| 2 indicators | IP 65 | 80 °C | |
Position indicator with electronic indicator for handwheels 5-digit LCD display, programming with 3 different keys Integrated battery with 4 years lifetime Maximum speed of 400 rpm IP54 protection class
Position indicator with electronic indicator for handwheels; easily replaceable integrated battery with a minimum life of 4 years; Adjustable functions thanks to the buttons on it
| Indicator Number of Digits | Diameter | Protection | Measure After 1 Rev. | Maximum Speed | Datasheet |
|---|---|---|---|---|---|
| 5 digit LCD | 85 mm | IP 54 | The desired value from -99999 to +99999 | 400 RPM | |