AGS 300 Series Speed And Direction Sensors || ATEK || Made in Turkey
Hall-effect sensing technology
Integrated into the gearbox
Static measurement (zero-speed detection)
Dual pulse output (inverted)
Direction detection capability (with 2 sensors)
Different length options for compatibility with various gearbox types
IP67 protection rating
With the Hall effect technology, it detects the speed and direction of the gears and gives square wave output signal.
Operating Voltage | Operating Distance | Output | Protection | Datasheet |
---|---|---|---|---|
6,5…30VDC | Min:0.8mm, Max:2.5mm | Double pulse (inverted) |
IP67
|
![]() |
- Hall-effect sensing technology
- Integrated into the gearbox
- Static measurement (zero-speed detection)
- Dual pulse output (inverted)
- Can be sealed
- Direct connection to the vehicle electrical system
- Direction detection capability (with 2 sensors)
- Different length options for compatibility with various gearbox types
- IP67 protection rating
Brand |
Atek |
---|---|
Supply Voltage |
6,5…30VDC |
Current Consumption (max) |
5mA @6,5VDC / 11mA @24VDC / 13mA @30VDC |
Output |
Double pulse (inverted) |
Signal Type |
Square |
Output Resistance |
Open collector |
Connection |
Unearthed |
Frequency |
0…4kHz |
Output signal A1 |
UL ≤ 1.9 V (1 mA) |
Output signal A2 |
inversion of A1 |
Impulse Wheel |
Min. 2m |
Minimum Distance |
0.8mm |
Maximum distance |
2.5mm |
Sensor Connection |
M18 x 1,5 thread |
Torque (wrench size) |
max. 50 Nm (SW 27) |
Material |
Case: AISI 304L |
Operating temperature |
-40°C … +150°C |
Storage Temperature |
-40°C … +150°C |
Protection Class |
IP67 |
Short-circuit Protection |
Yes |
Reverse polarity Protection |
Yes |
EMC Protection |
TS EN IEC 61326-1 |
•For tachographs / EU-type electronic tachographs KTCO 1318, FTCO 1319, and MTCO 1390 NEC •General use in devices requiring electrical pulses (dual, inverted) for road speed and/or distance measurement
Benzer Ürünler
Hall effect technology 5V or 10V push-pull output LED status indicator Reverse polarity and short-circuit protection
With the Hall effect technology, it detects the movement in the gears and gives a push-pull output signal.
Operating Voltage | Operating Distance | Output | Datasheet |
---|---|---|---|
8...33VDC | 4,2 mm max. | 5V or 10V Push-Pull | ![]() |
Hall-effect measurement technology Quadrature square wave output Direction information with 90° phase shifted dual output signal Wide frequency range IP67 protection
With the Hall effect technology, it detects the speed and direction of the gears and gives Quadrature square wave output signal.Operating Voltage | Operating Distance | Output | Protection | Datasheet |
---|---|---|---|---|
8...30VDC | Model-1: Min:0mm, Typ:0.8mm, Max:1.6mm Model-2: Min:0mm, Typ:1.2mm, Max:2.4mm | NPN |
IP67 |
![]() |