AGS 10 Series Gear Motion Sensor || ATEK || Made in Türkiye
Hall effect technology
5V or 10V push-pull output
LED status indicator
Reverse polarity and short-circuit protection
With the Hall effect technology, it detects the movement in the gears and gives a push-pull output signal.
Operating Voltage | Operating Distance | Output | Datasheet |
---|---|---|---|
8…33VDC | 4,2 mm max. |
5V or 10V Push-Pull
|
- Hall effect technology
- 5V or 10V push-pull output
- LED status indicator
- Reverse polarity and short-circuit protection
Brand |
Atek |
---|---|
TECHNICAL FEATURES |
–> |
Operating Voltage |
8…33VDC |
Current Consumption |
10 mA (w/o load) |
Output Type |
5V push-pull veya 10V push-pull |
Output high level (VoutHigh) |
3,5V < VoutH < 5,5V (5V push-pull) |
Output low level (VoutLow) |
0V < VoutL <0,7V |
Output Current (nominal) |
±4mA (short circuit with GND or Vcc) (5V push-pull) |
Thold |
2,2 sn ± % 10 |
Output switching characteristic |
Hız=0: Vout=VoutH |
Load capacity |
≤5nF |
Operating distance |
4,2 mm max. |
Reverse polarity protection |
Yes |
Output short circuit protection |
Yes |
Operating temperature |
-35°C…+85°C |
Electrical Connection |
3 x 0.14 mm2 shielded cable and Superseal 4 pin connector |
Benzer Ürünler
Hall-effect measurement technology Quadrature square wave output Direction information with 90° phase shifted dual output signal Wide frequency range IP67 protection
With the Hall effect technology, it detects the speed and direction of the gears and gives Quadrature square wave output signal.Operating Voltage | Operating Distance | Output | Protection | Datasheet |
---|---|---|---|---|
8...30VDC | Model-1: Min:0mm, Typ:0.8mm, Max:1.6mm Model-2: Min:0mm, Typ:1.2mm, Max:2.4mm | NPN |
IP67 |