Skip to main content

Atek Alfa

MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ALFA || Made in Türkiye

Flexible body system
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃

Technical Datasheet

PDF

Description

Flexible body system
Thermocouple (temperature sensor)
Better than ±0.5% accuracy
4 – 20mA, 0 – 10V or 3.33mV/V output
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Internal 80% shunt calibration
Standard Inconel diaphragm
Optional auto-zero function
Applications with process temperature of up to 400℃
Maximum Torque:30Nm (22lbf ft)
Optional safe relay function

Applications

MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.

Additional Information

Brand	ATEK ALFA
Electrical Connection	6PIN,7PIN, 8PIN soket
Material	Body: Titanium Nitride , Diaphgram: Inconel
Measuring Principle	4-arm bonded foil strain gage Wheatstone bridge
Measuring Range	0~35 to 2000bar (0~500 to 0~30000psi)
Mechanical Connection	1/2-20 UNF (45° conical seal), M14x1.5, M18x1.5, M22x1.5
Mounting / Tightening Torque Value	30Nm

Output Signals	4-20 mA, 0-10 VDC, 3,33 mV/V
Repeatability	± % 0,2 FS
Sensitivity	± % 0,5 FS
Sensor Type	E, J, K, S type or PT100
Supply Voltage	4...20 mA and 0-10V: 9…36 VDC, 3.33mV/V: 6…12 VDC
Units	PSI, Bar, MPa or Kg/cm²

Downloads

Technical Datasheet

PDF