Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earhquake Sensors
Tap Sensors
Seam Detector Sensors
Accessories
RCB 3100 Series Return Spring System Angle Sensor || ATEK || Made in Türkiye
Electrical angle options up to 360°
Spring and mechanical stop option for 120° (mechanical 124°)
0-10 VDC, 4-20 mA or ratiometric output options
12 bit resolution
8 mm hole diameter
IP54 protection class
Contactless, high-accuracy magnetic principle angular measurement; spring return and mechanical stop option; long life sensor
| Electrical Measurement Range | Mechanical Measurement Range | Resolution | Output | Protection | Supply Voltage | Datasheet |
|---|---|---|---|---|---|---|
| Different options between 0…360º | 360° continious, optionally with 124°±3 mechanical stop | 12 bit | Ratiometric, 4-20 mA or 0-10 VDC | IP 54 | 5 VDC or 24 VDC |  |
- 12 bit resolution
- 0-10 VDC, 4-20 mA or ratiometric output options
- Electrical angle options up to 360°
- Spring and mechanical stop option for 120° (mechanical 124°)
- IP54 protection
- Long service life
- Compact design
- High accuracy
| Brand |
Atek |
|---|---|
| Measuring Type |
Magnetic, non-contact |
| Electrical Measuring Range |
Can be produced in the desired range up to 360° |
| Mechanical Measuring Range |
360° continious, optionally with 124°±3 mechanical stop |
| Resolution |
12 bit |
| Linearity |
±%0.5 FS |
| Repeatability |
0.1° |
| Response Frequency |
250 Hz |
| Output Signal |
Ratiometric (Supply Voltage:5 VDC, Load:≥ 1KΩ) |
| Reverse Polarity Protection |
Yes, only supply |
| Operating Temperature |
-25…+85 °C |
| Electrical Connection |
3 x 0,14 mm² shielded cable and superseal connector |
| Max Operational Speed |
120 rpm |
| Protection Class |
IP54 |
| Material |
Body: Aluminum |
- Robotic systems
- Auto parts
- Solar energy and photovoltaic systems
- Automatic Guided Systems
- Crane and lifting systems
- Wind Power Plants
Benzer Ürünler
Rotary Encoder, Incremental Rotary Encoders, Linear Measurement, Linear Encoder, Magnetic Linear Encoders, Rotary Measurement
Suitable for MLS 110/120/130/210 series Different resolution options up to 36000 pulses with Atek MLS series reader sensors Magnetic non-contact incremental measurement 1mm, 2mm or 5mm pitch Hollow shaft up to 54mm IP67 protection
Incremental magnetic ring made of sintered hard ferrite material suitable for use with magnetic reader sensors MLS 110/120/130/210 series
| Number Of Pole | Pitch | Material | Accuracy | Datasheet |
|---|---|---|---|---|
| 36, 46, 50, 64, 72, 100 or 128 | 1 / 2 / 5 mm | Sintered hard ferrite | 0.1° / 0.01° (depending on ring diameter) | |
Absolute measurement with magnetic principle 58 mm body diameter 6, 8,10, 12 or 14 mm shaft options 12 bit angular resolution SSI interface Durable up to 3000 RPM IP54 protection class
Extremely resistant to harsh environmental conditions with magnetic mesauring principle; absolute precision measurement; 58 mm body diameter; different shaft options
| Resolution | Shaft Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| 12 bit | 6, 8, 10, 12 or 14 mm | 58 mm | Clamping, Synchro, Tacho and Square | SSI 13 bit (12 bit data + 1 stop bit) | IP 54 | |
Incremental measurement with optical principle 50 mm body diameter 6, 8, 10 or 12 mm semi hollow shaft options Resolution options from 60 to 20000 pulses Durable up to 6000 RPM IP54 protection class
Incremental and extremely high precision measurement with optical measuring principle; 50 mm body diameter; end hollow shaft; different flange options
| Resolution | Shaft Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Different options from 60 to 20000 pulses | 6, 8, 10 or 12 mm | 50 mm | Z type or Circular | Push-Pull, TTL Line Driver, Open Collector | IP 54 | |
Incremental measurement with magnetic principle 58 mm body diameter Shaft options between 6 and 20 mm Resolution options from 1 to 1024 pulses Durable up to 3000 RPM IP54 protection class
Extremely resistant to harsh environmental conditions with magnetic mesauring principle; incremental precision measurement; 58 mm body diameter; end hollow shaft; different flange options
| Resolution | Hole Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| Different options from 1 to 1024 pulses | Different hollow diameters between 6 mm and 20 mm | 58 mm | Z type or Circular | Push-Pull, TTL Line Driver, Open Collector | IP 54 | |
Incremental measurement with optical principle 100 mm body diameter Hollow shaft options from 13 mm to 42 mm 1024 pulse resolution IP54 protection class
Incremental and extremely high precision measurement with optical measuring principle; 100 mm body diameter; hollow shaft
| Resolution | Hole Diameter | Body Diameter | Flange Type | Output | Protection | Datasheet |
|---|---|---|---|---|---|---|
| 1024 pulse | Options from 13 mm to 42 mm | 100 mm | Z type | Push-Pull, TTL Line Driver, Open Collector | IP 54 | |
Non-contact measurement with magnetic principle Incremental output 58 mm body diameter 6 mm, 8 mm or 10 mm shaft options Resolution options between 1 pulse and 1024 pulses IP67 protection class
Incremental measurement with magnetic principle; 58 mm body diameter; design with shaft, IP67 protection class
| Resolution | Shaft Diameter | Body Diameter | Output | Protection | Datasheet |
|---|---|---|---|---|---|
| Options from 1 to 1024 pulses | 6, 8 or 10 mm | 58 mm | Push-Pull, TTL Line Driver, Open Collector | IP 67 | |