ITS 20 Series Faucet Sensors || ATEK ALFA || Made in Türkiye

  • Infrared sensor suitable for use in touchless faucets, taps, and urinals
  • On-site configuration of detection range, water flow duration, and on/off functions via remote control
  • Various housing options adaptable to different applications
  • Low power consumption
  • Strong moisture resistance
Technical Datasheet
PDF
Description
  • Infrared sensor suitable for use in touchless faucets, taps, and urinals
  • On-site configuration of detection range, water flow duration, and on/off functions via remote control
  • Various housing options adaptable to different applications
  • Low power consumption
  • Strong moisture resistance
  • High performance in noise immunity and vibration resistance
Applications

ITS faucet sensors operate based on the principle of emitting and detecting infrared rays to sense the presence and/or movement of objects within the detection area. The primary function of these sensors is to send a signal to the valve to start water flow when hands are detected, and to stop the flow when hands are removed. They precisely control when the valve should open or close the water flow, depending on the presence or absence of hands.

Additional Information
Automatic Flow Stop (Object in Front of Sensor)120 sn
BrandATEK ALFA
Current Consumption10-100 µA (in standby mode)
Housing MaterialABS
IR Wavelength940 nm
LED Indicator Blue LED: Flashes once when an object is detected , Red LED: Flashes once when object detection is lost. Flashes once per second when the battery level falls below 4.8V.
Lifetime500.000 cycles
Object Detection DistanceAdjustable between 5-30 cm (±2 cm) by remote control or manually (Default: 15 cm)
Output Pulse Width20 ms
Sensor Range Error± 10 % of the nominal sensor range
Sensor TypeIR
Supply Voltage4.8V – 6.7V DC (can operate with battery or adapter)
Water Flow Time (After Object Removed from Sensor)Adjustable between 0.5 and 16 seconds (Default: 1 second)
Downloads
Technical Datasheet
PDF