MPTS 133 Melt Pressure Sensor With Flexible Body and Thermocouple || ATEK ||

Flexible body system
Thermocouple (temperature sensor)
0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Better than ±0.5% accuracy
4-20mA, 0-10 VDC or 3,33 mV/V output
Applications with process temperature of up to 400℃

Pressure and temperature measurement of hot fluids; Precise and durable measurement with mercury; titanium nitride coated flexible body; thermocouple (temperature sensor)

Measuring Range Body Structure Output Max. Temp. Accuracy Datasheet
0…35 to 0…2000 bar Flexible body with thermocouple 4-20 mA, 0-10V, 3.33mV/V 400°C  %0,5 FS
  • Flexible body system
  • Thermocouple (temperature sensor)
  • Better than ±0.5% accuracy
  • 4 – 20mA, 0 – 10V or 3.33mV/V output
  • 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • Internal 80% shunt calibration
  • Standard Inconel diaphragm
  • Optional auto-zero function
  • Applications with process temperature of up to 400℃
  • Maximum Torque:30Nm (22lbf ft)
  • Optional safe relay function
Brand

Atek

Pressure Range

0~35 to 2000bar (0~500 to 0~30000psi)

Measurement principle

4-arm bonded foil strain gage Wheatstone bridge

Supply Voltage

4-20 mA and 0-10V output models: 24VDC (recommended), 9…36 VDC
3.33mV/V output models: 10VDC (recommended), 6…12 VDC

Output Signals

4-20 mA
0-10 VDC
3,33 mV/V

Max. diaphragm temp.

400°C

Maximum Overload Pressure Rating

1.5 x FS(<1000bar)
1.2 x FS(>1000bar)

Pressure Units

PSI, Bar, MPa or Kg/cm²

Accuracy

± % 0,5 FS

Repeatability

± % 0,2 FS

Internal Shunt Calibration

% 80FSO ± % 1 FSO

Temperature sensor

E, J, K, S type or PT100

Electrical Connection

6PIN,7PIN, 8PIN

Max Torque

30Nm

Process Connection

1/2-20 UNF (45° conical seal)
M14x1.5, M18x1.5, M22x1.5

Body

Titanium Nitride

Diaphgram Material

Inconel

MPTS series melt pressure sensors are used to measure the pressure and temperature of hot fluids in the plastics, rubber, food, etc. sectors.

DATASHEET
PDF
PDF