Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earhquake Sensors
Tap Sensors
Seam Detector Sensors
Accessories
EPD11 Plug-In Intelligent LCD Display with Alarm for Transmitters || ESKON
5 digit, 7 section high-contrast LCD display
DIN 43650 4 pin polarized Plug in/out connector
Compatible with transmitters with 4-20 mA output
4-20 mA 2-wire line supply
Accuracy: 0.1% +/- 1 digit
IP55 protection class
The EPD11 digital display is used to convert and display the 4-20mA signal taken from the transmitters to the desired measurement unit. The product has high accuracy, good stability, easy operate features. Designed to plug in / plug out of DIN43650 connected 2 wire transmitters. The product has high accuracy, stability and easy operation. It is a convenient way to add a display, and an alarm set point, to pressure or other transmitters.
| Display Range | Input Signal | Accuracy | Protection Class | Datasheet |
|---|---|---|---|---|
| -19999 ～99999 | 4-20 mA | 0.1%F.S ±1 bit | IP55 |  |
- 24-bit high accuracy ADC sampling, lightning protection (4KV)
- Backlight big screen, 350° rotation angle
- 5 digit, 7 section high contrast LCD display:-19999 to 99999
- Suitable for 4-20 mA transmitters
- 2 alarm / switch outputs that can be adjusted according to max and min set values
- Accuracy: 0.1% F.S. +/- 1 digit
- More than 30 measurement units option abjustuble from menu
- Plug in/out-DIN 43650 4 pin polarised
- Error message for high / low range
- IP55 protection class
- Easy configuration with 3 buttons
- 4-20 mA 2-wire loop power
- Reverse polarity and lightning protection (4KV)
- Voltage drop max. 8 V
- Display of differential pressure in differential pressure transmitters
| Brand |
Atek |
|---|---|
| Applications |
4-20 mA current value or percentage site display |
| Input signal |
4-20 mA (2-wire) |
| Power supply |
4-20 mA 2-wire loop power supply, max pressure drop 8VDC |
| Site operation |
3 buttons, all parameters can ve modified at site |
| Display |
Double row 5bit/8bit, 7 section/16 section with backlight LCD display |
| Accuracy |
% 0.1 F.S ±1 bit |
| ADC sampling |
24 bit |
| Switch quantity |
2 way PNP for option |
| Switch state |
Normally open, normally closed for option |
| Switch function |
High setting, low setting, window function, hysteresis function |
| State indicate |
Red or Green LED display |
| Material |
ABS+PC |
| Rotation Angle |
350° |
| Anti-Vibration |
20g, 20-5000Hz |
| Anti-Shock |
100g, 11 ms |
| Electrical protection |
Short Circuit protection, reverse polarity protection |
| Measuring Units |
kPa, MPa, Pa, bar, mbar, psi, mH2O, mmH2O, Torr, atm, kg, g, mg, N, kN, °C, °F, K, %RH, %VOL, PPM, %LEL, pH, m, cm, mm, inch, m/s, Ω, kΩ, mV,V |
It is used to receive 4-20mA signal from the transmitters and convert to the desired measurement unit and display it.
Benzer Ürünler
Ceramic diaphragm Stainless steel body Options from 0 ... 100 millibar to 0 ... 40 bar ±0.3% FS sensitivity Different analog output options IP65, IP67 or IP68 protection class Economical and convenient solution
Special series pressure transmitter for low pressures with ceramic diaphragm; economical and durable solution; relative or absolute measurement option
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.1 to 0 ... 40 bar | 4-20 mA, 0-10 VDC, 0.5-4.5 VDC ratiometric, 0-5 VDC, 1-6 VDC | IP65, IP67, IP68 | ±%0.3 FS | |
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and CANopen output options ±0.5% F.S or ± 0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0...100mbar to 0...600bar Different vacuum models from 0...-100mbar to 0...-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric or CANopen | IP65 or IP67 | ±%0,5 F.S (ceramic), ±%0,3 F.S (silicon) | 22mm | |
Piezoresistive working principle Stainless steel housing (1.4305) Optional 316L or titanium housing Different models between 100 mBar and 600 Bar Analog 4-20mA / 0-10V and so on different outputs ±0.3% F.S accuracy IP65 or IP67 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different models from 0…100mbar to 0…600bar Different vacuum models from 0…-100mbar to 0…-1bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric etc. | IP65 or IP67 | ±%0,3 F.S | 26mm | |
Piezoresistive working principle Stainless steel housing 10Bar and 16Bar models 4-20mA analog output ±0.5% F.S accuracy IP65 protection class Compact construction
Stainless steel body; high sensitivity; EMC and reverse polarization protected; small and compact design
| Measuring Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| 0…10bar and 0…16bar | 4-20 mA | IP65 | ±%0,5 F.S | 24mm | |
Suitable for use in explosive environments Atex and IECEx certificate Thin film steel diaphragm Stainless steel body Options from 0 ... 400 millibar to 0 ... 2000 bar ±0.3% FS or ±0.5% FS sensitivity 4-20 mA analog output IP65 or IP67 protection class
Pressure transmitter with steel diaphragm; Ex-Proof certified, suitable for use in explosive environments; resistant to high pressures up to 2000 bar; superior sealing thanks to one piece welding body
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.4 to 0 ... 2000 bar | 4-20 mA | IP65, IP67 | ±%0.3 FS, ±%0.5 FS | |
0~0,0025bar…0,01bar…1bar pressure range Suitable for low pressure φ8 agnail connection, easy to install ±0.5%...±3%FS accuracy 4-20 mA analog output IP65 protection class
BFT10-110 Differential Pressure Transmitter is ideal for use at low pressures. Pressure connection is in M10 thread and agnail structure. It is widely used in the field of automatic pressure detection and control for air supply in underground ventilation and other electrical and mining industries.
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0~0,0025bar…0,001bar…1bar | 4-20mA | IP 65 | ±0.5%...±3%FS | |