Linear Measurement
Rotary Measurement
Inclination/ Tilt Measurement
Pressure Measurement
Level Measurement
Temperature Measurement
Liquid Flow Measurement
Proximity Sensors
Joysticks
Dro, Display and Counters
Elevator Light Curtains
Speed and Motion Measurement
Counting Sensors
Seismic / Earhquake Sensors
Tap Sensors
Seam Detector Sensors
Accessories
EPD 30 Intelligent Pressure Transmitter With LCD Display, Delrin Case || ATEK ||
100 milibar….600 BAR pressure range
Easy configuration with LCD module buttons
24VDC supply voltage
4…20mA/HART or MODBUS RTU output
Many measurement unit options adjustable from the menu
High accuracy up to ±%0,3 FS
IP55 protection class
EPD20 pressure transmitter with LCD display, is used to convert and display measured pressure value to desired measurement unit. Modbus and HART output options are available. Parameter configuration and compensation of the transmitter can be done on-site and easily with the buttons on the LCD module.
| Pressure Range | Output Type | Display | Accuracy | Protection | Datasheet |
|---|---|---|---|---|---|
| 100 milibar….600 BAR | 4…20mA/HART or MODBUS RTU | 2 line backlight LCD | ±%0,5 or ±%0,3 F.S | IP65 |  |
- 100 milibar….600 BAR pressure range
- Easy configuration with LCD module buttons
- 24VDC supply voltage
- 4…20mA/HART or MODBUS RTU output
- HART output model: LCD with backlight, displaying 5 bits, and 4 decimal places
- MODBUS output model: LCD with backlight, displaying 6 bits, and 5 decimal places
- Many measurement unit options adjustable from the menu
- High accuracy up to ±%0,3 FS
- Short circuit and reverse polarity protection
- Delrin case
- Excellent long-term work
- IP55 protection class
| Brand |
Atek |
|---|---|
| GENERAL FEATURES |
–> |
| Pressure Range |
Diffrent models from 0…100mbar to 0…600Bar |
| Output signal |
4…20mA/HART or MODBUS RTU |
| Supply voltage |
HART output model: 12-32VDC (suggested 24VDC) |
| Site operation |
3 buttons, all parameters can ve modified at site |
| MECHANICAL AND ENVIRONMENTAL FEATURES |
–> |
| Working and storage temperature |
-30°C … +70°C |
| Protection class |
IP65 |
| Material |
Transmitter : Stainless steel hosuing – 1.4305 (AISI303), Optional stainless 316L or Titanium |
| TRANSMITTER FEATURES |
–> |
| Measurement Range |
Diffrent models from 0…100mbar to 0…600Bar |
| Measurement Type |
Ambient pressure measurement as relative |
| Working Principle |
Piezoresistive |
| Maximum Compressive Strength |
300%F.S. ≤700mbar, 200%F.S. ＜250Bar |
| Oring – Sealing |
Standard NBR, optional FKM(Viton) or EPDM |
| Process Connection |
G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14, UNF7/16X20M, UNF7/16X20F |
| Accuracy |
± % 0,5 T.S or ±%0,3 T.S @25ᵒ C |
| Long Term Stability |
± % 0,3 T.S/ year |
| Response Time |
1ms … nominal pressure |
| Mounting / Tightening Torque |
15 … 20 Nm |
| LCD DISPLAY FEATURES |
–> |
| Display |
Modbus Output Model: LCD with backlight, displaying 6 bits, and 5 decimal places |
| Units |
Modbus Output Model: KPa, Pa, MPa, mmH2O, mH2O, mbar, bar, PSI, M,% |
| Sampling rate |
>20 times/s |
| Display interface |
Enlish and Chinese; pressure, temperature, current, percentage |
| Linearity |
Better than %0,2 |
| Stability |
% 0.2/year |
| Circuit protection |
Surge current protection, reverse power protection |
| Isolation range |
>200MΩ |
| Motherboard buttons operation |
reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration) |
| LCD buttons operation |
changing machine address (0-255), units, decimal place, damping time and zero clearing |
- Pneumatic Systems
- Air compressors
- Air Cooling-Heating Systems
- Water Pumps
- Liquid tanks
- Medical industry
- Chemical industry
Benzer Ürünler
Marine certified With ceramic diaphragm Stainless steel or titanium body Options from 0 ... 0.1 bar to 0 ... 250 bar ±0.3% FS sensitivity 4-20 mA analog output IP65, IP67 or IP68 protection class Economical and convenient solution
Pressure transmitter with ceramic diaphragm; marine certified; economic and durable; relative or absolute measurement option
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.1 to 0 ... 250 bar | 4-20 mA | IP65, IP67, IP68 | ±%0.3 FS | |
Thin-film steel diaphragm structure 26 mm diameter stainless steel housing Different options up to 5000 Bar Analog 4-20mA / 0-10V etc. outputs ±%0,5 F.S accuracy Compact design
Fully welded Thin-film steel diaphragm structure that does not require O-rings; High sensitivity; EMC and reverse polarition protection; Small and compact design
| Pressure Range | Output | Protection | Accuracy | Body Diameter | Datasheet |
|---|---|---|---|---|---|
| Different options up to 5000 Bar | 4-20 mA, 0-10 VDC, 0-20 mA, 1-6 VDC, 0-5 VDC, Ratiometric | IP65 or IP67 | ±%0,5 F.S | 26mm | |
Suitable for use in explosive environments Atex and IECEx certificate Thin film steel diaphragm Stainless steel body Options from 0 ... 400 millibar to 0 ... 2000 bar ±0.3% FS or ±0.5% FS sensitivity 4-20 mA analog output IP65 or IP67 protection class
Pressure transmitter with steel diaphragm; Ex-Proof certified, suitable for use in explosive environments; resistant to high pressures up to 2000 bar; superior sealing thanks to one piece welding body
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.4 to 0 ... 2000 bar | 4-20 mA | IP65, IP67 | ±%0.3 FS, ±%0.5 FS | |
Thick film ceramic diaphragm Stainless steel body Options from 0 ... 0.1 bar to 0 ... 6 bar ±0.3% FS accuracy 4-20 mA analog output IP68 protection class
Submersible pressure transmitter with ceramic diaphragm; suitable for pressure measurement of dense and viscous substances; protected against lightning strikes; PUR or PE cable options
| Measuring Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| 0 ... 0.1 to 0 ... 6.0 bar | 4-20 mA | IP68 | ±%0.3 FS | |
Suitable for temperatures up to 250°C Can work with pressures up to 400 bar G1/2 or G1/4 connections
Pressure transmitter cooling elements are products that cool the body of the pressure transmitters in high temperature applications and protect them from temperature. It can be used by connecting several products in a row according to the temperature. It can be used in different connections with different inlet / outlet dimensions.
| Maximum Pressure | Mechanical Connection | Maximum Temperature | Body | Datasheet |
|---|---|---|---|---|
| 400 Bar | G1/4F-G1/2M, G1/4F-G1/4M, G1/2F-G1/2M, G1/2F-G1/4M | 250°C | 316L Stainless Steel | |
Pressure switch with display -1 bar...10 bar pressure range ±2% FS accuracy Analog and transistor output Multiple measuring unit option
Pressure switch with ultra-low power consumption; multiple measurement unit option; analog and open collector output; high performance LCD display
| Pressure Range | Output | Protection | Accuracy | Datasheet |
|---|---|---|---|---|
| -1bar ... 10bar | 4-20 mA, 1-5 VDC, PNP/NPN Open Collector | IP40 | ±2% FS | |