ASM10 Siesmic Earthquake Panel || ATEK || Made In Türkiye

Shaking detection in 3 axes
Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings.
Thanks to the fire/gas detector and fire button input on it; In addition to detecting the earthquake, other alarm situations can also be monitored
4 dry contact relay outputs (220VAC or 24VDC);
Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire
Small structure, easy mounting

Shaking detection in 3 axes; In addition to earthquake detection, other alarm situations can be monitored with the external fire/gas detector and fire button input; With 4 dry contact relay outputs, systems such as elevators, electricity, emergency lighting etc. can be controlled in case of earthquake or fire; audible warning in case of earthquake; small and compact structure

 Detection Plane Frequency Range Input Output Supply Voltage Datasheet
X, Y, Z (3 axis) 1…7,7Hz 1 x button and 1 x fire/gas dedector with relay 4 x dry contact relay (24VDC 1A or 220VAC 2A) 12-24VDC

ASM 20 Seismic Earthquake Sensors have very sensitive sensors that can detect seismic movements in three axes (x,y,z,). It detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.

Additionally, there is 1 fire/gas detector input and 1 fire alarm button input on the device. If desired, a fire alarm button can be connected to the button input, and a gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.

The device has 4 dry contact relay outputs. 2 of the relay outputs are activated during an earthquake and 2 of them are activated when an alarm comes from an externally connected button or detector.

  • Shaking detection in 3 axes
  • Thanks to its automatic offset feature, that is, its location detection feature, it is ready to detect earthquakes without the need to make any settings.
  • There is 1 fire/gas detector input and 1 fire alarm button input on the sensor. If desired, you can connect the fire alarm button to the button input; Gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.
  • 24VDC supply voltage
  • 4 dry contact relay outputs (220VAC or 24VDC);

Earthquake relays are activated when an earthquake is detected,

  • Fire relays are activated when an alarm comes from the external gas/fire detector or fire button input.
  • Audible warning with buzzer and visual warning with LEDs in case of earthquake and fire
  • Robust and durable
  • Small structure, easy mounting
Brand

Atek

TECHNICAL FEATURES

–>

Operating Voltage

12-24 VDC

Quiescent Current

20mA @24VDC

Alarm Current

150mA @24VDC

Detection Plane

X, Y, Z (3 axis)

Frequency Sensitivity Range

1…7,7Hz

Min. sensitive acceleration threshold

+/- 40 mg

External Inputs

1 x alarm button
1 x dedector (12-24VDC powered, dry contact relay output)
(NO or NC adjustable) (Factory NC input)

Relay Output

4 x dry contact relays (24VDC 1A or 220VAC 2A)
Earthquake1/Earthquake2 becomes active when an earthquake is detected,
Fire1/Fire2 becomes active when a warning comes from the button or detector.

Buzzer

85dB/1m

Operating Temperature

-10°C … +60°C

Relative humudity

%10…%90 non-condensing

Housing Material

Metal

ASM 20 Seismic Earthquake Sensors have very sensitive sensors that can detect seismic movements in three axes (x,y,z,). It detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.Additionally, there is 1 fire/gas detector input and 1 fire alarm button input on the device. If desired, a fire alarm button can be connected to the button input, and a gas alarm detector, smoke detector and other systems that are desired to be monitored can be connected to the fire/gas detector input. In this way, earthquakes can be detected and alarm conditions from other systems can be monitored through a single device.

DATASHEET
PDF