ASM10 Siesmic Earthquake Panel || ATEK || Made In Türkiye

Shake detection in 3 axes
Keeping the last 100 earthquake events in memory and viewing them from the menu
Automatic offset feature
Up to 24 hours of operation with internal battery for situations such as power outages
Programmable 4 dry contact relays and 12V 5A solenoid output

Shake detection in 3 axes; automatically cut off gas and energy and stop the elevator in case of an earthquake; 4 programmable dry contact relays and 1 12V 5A solenoid output; Visual and audible warning in case of earthquake; 100 event log memories; up to 24 hours of operation on battery during power outages; easy installation and use with user-friendly interface

 Detection Plane Frequency Range Output Supply Voltage Battery Capacity  Datasheet
X, Y, Z (3 axis) 1…7,7Hz 1 x 12VDC 5A solenoid
4 x dry contact relay (250V 10A)
85-305 VAC, 47-440 Hz 12VDC, 2.2Ah

ASM 10 Earthquake Sensor detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as gas valves, generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LCD screen and LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.

It performs the following functions during an earthquake:

• A loud alarm sounds to alert you. Thus, it allows you to wake up especially during sleep.
• It cuts your gas. For example, if your stove is on, it cuts off the gas and turns off the stove. Thus, it provides protection against the risk of explosion.
• To prevent you from being stuck in a moving elevator, it stops the elevator at the nearest floor and opens its doors.
• It cuts off your electricity, thus preventing the risk of fire due to electricity.

Our product can perform all of these functions at the same time, or it can only perform the functions you want. For example, during an earthquake, you can only give an alarm and not use other functions.

• Shake detection in 3 axes
• Keeping the last 100 earthquake events in memory and viewing them from the menu
• Automatic offset feature
• Up to 24 hours of operation with internal battery for situations such as power outages
• Color LCD display and status LEDs
• Audible and visual warning in case of earthquake or error
• To automatically cut off gas and energy in case of an earthquake;
4 dry contact relays (2 standard, 2 optional) that can be set in different functions and1 12V 5A solenoid output
• Gray or red color option
• Sturdy and durable structure
• Easy installation

Brand

Atek

TECHNICAL FEATURES
Operating Voltage

85-305 VAC, 47-440 Hz

Quiescent Current

19mA @230 VAC

Power Drawn

4,37W @230 VAC (typical)

Battery Charging Voltage

14V (+/-0.2V)

Current Drawn from the Battery

From 12V Battery (While 0 full):
While the device is in stand-by state: 20mA
The device is in normal operating state, there is no alarm: 48mA
While there is earthquake alarm, all outputs active: 118mA (except solenoid)

Battery Capacity

12VDC, 2.2Ah

Operating Time from Battery

≤24 hours

Detection Plane

X, Y, Z (3 axis)

Frequency Sensitivity Range

1…7,7Hz

Min. sensitive acceleration threshold

+/- 40 mg

Relay Output

4 x dry contact relays (250V 10A) (2 standard, 2 optional)

Solenoid Output

1 x 12VDC 5A

S. Valve energization in case of alarm

It detects in 5 seconds or less. Typically detection occurs in under 1 sec.

Solenoid connection cable thickness and distance

0.57mm x 2 TTR / 20m max.

Buzzer

85dB/1m

Operating Temperature

-10°C … +60°C

Relative Humidity

%10…%90 non-condensing

Housing Material

Metal

ASM 10 Earthquake Sensor detects the seismic vibrations that occur during an earthquake and gives control output and it is designed to automatically disable the devices such as gas valves, generators, electrical panels, elevators, etc. that may pose a danger during an earthquake. If such movements are detected, it also provides an audible warning with a buzzer and a visual warning with LCD screen and LEDs. Thus, the damages that may occur as a result of the earthquake are minimized.It performs the following functions during an earthquake:• A loud alarm sounds to alert you. Thus, it allows you to wake up especially during sleep.• It cuts your gas. For example, if your stove is on, it cuts off the gas and turns off the stove. Thus, it provides protection against the risk of explosion.• To prevent you from being stuck in a moving elevator, it stops the elevator at the nearest floor and opens its doors.• It cuts off your electricity, thus preventing the risk of fire due to electricity.

DATASHEET
PDF